Mold and mildew in the cellar, basement: how to get rid of it, how to treat it

Mold easily grows in any basement or cellar. The reason for this is a favorable environment: high humidity, poor ventilation system or poor quality waterproofing.

To prevent this, you need to constantly perform preventive work. If the moldy fungus has already managed to penetrate into the cellar space and is quickly spreading there, folk methods or effective modern drugs will help get rid of it.

What is mold

This substance is a fungal colony. Its spores constantly hover in the air and, when a favorable environment arises, they attach themselves to a suitable surface and begin to quickly take over space and reproduce. To do this, the fungus needs high air temperature and high humidity.

The surfaces on which mold can live are very different. The colony will successfully develop on wood, concrete, brick and other materials. It gradually takes over walls and ceilings, moves to the ceiling and other building structures. Over time, the fungus penetrates the thickness of walls and ceilings and destroys the material. Therefore, if steps are not taken in time to destroy the colony, the house will soon need to be repaired or even rebuilt.

Important! Separate black, brown and white mold. The shade of the fungus indicates class and the age of the colony. Often the color of mold is influenced by the nature of the surface where it grows.

Molds do not develop on their own. Usually there are objective prerequisites for this. The causes of mold in the cellar are:

• insufficient supply of fresh air, poor operation of the ventilation system or its clogging;
• accumulation of condensation as a result of increased moisture or lack of ventilation;
• poor circulation and air stagnation in the cellar space;
• finding rotten foods in storage, which are an excellent breeding ground for the colony;
• use of wood affected by mold as a building material.

Reasons for appearance

Mold never appears just like that; this event is preceded by other unfavorable circumstances:

• missing or clogged ventilation shafts. Lack of fresh air contributes to the growth of fungal colonies;
• increased level of air humidity, condensation accumulation. This aspect often depends on the first factor;
• insufficient air circulation in the cellar;
• storage of rotten fruits and vegetables. Spoiled products become sources of mold, spores actively spread throughout the room, settling on the walls, floor and ceiling;
• the use of wooden products that are contaminated with fungal spores.

Note! Depending on the growth of colonies of fungi similar to cotton wool, the methods of dealing with uninvited “tenants” of the cellar also differ. Without eliminating the unfavorable factor, it is difficult to protect the health and integrity of the premises.

Under what circumstances does fungus grow in the cellar?

Mold does not always appear in the basement. To do this, the following conditions must be simultaneously met:

1. The appearance of mold spores in the airspace of the utility room. They can be carried along with food, on human skin or animal fur.
2. Presence of a nutrient organic medium. This could be paper, wood fibers, peat pots, fertile soil.
3. Microclimate with high humidity and temperature at +20 degrees. Stagnant air increases the likelihood of mold growth.

Not all types of mold require air heating above +20 degrees. There are fungi that successfully reproduce even at 0 degrees.

It is also necessary to note the quality of the ventilation system. The freely circulating air flow does not allow mold spores to gain a foothold on the surface. Therefore, where the air is stagnant, mold forms more often. The movement of air masses in the corners of the room is especially difficult. Therefore, mold grows there more often.

High-quality ventilation does not allow excess moisture to accumulate in the utility room, resulting from a significant difference in temperature between outside and inside or due to increased humidity. Spores are unable to take hold and germinate, even if they are present on structures, but there are no suitable conditions for development. Therefore, the main reason for the development of mold in the cellar is considered to be poor-quality ventilation.

Preventive recommendations

Regularly carry out preventive measures to combat dangerous microorganisms in the cellar. Keep the room clean, clean it regularly, and be sure to thoroughly dry the room:

• Drying the cellar takes up to fourteen days. Carry out manipulations on cloudless days, take the shelves outside, pre-treat them with water and liquid soap;
• after a week, the boards will be completely dry, then treat them with an antifungal agent;
• Treat the dry cellar with a similar product after thorough drying;
• if the cellar includes an earthen floor, then pour a solution of copper sulfate into it. Place sand or lime under the vegetables.

After such prevention, no mold will settle in the cellar, all products will be stored for a very long time. Follow useful tips; if microorganisms have multiplied, then use the tips for eliminating mold.

Another interesting method of combating mold in the cellar and garage can be learned from the following video:

Health harm from mold

Not all people know why white mold in the basement is dangerous for building structures and for health. In addition to the danger of injury due to a floor or ceiling destroyed by fungus, mold causes many diseases. Contact with spores of a fungal colony is possible directly with the skin, after inhaling particles along with air, or through eating foods contaminated with the fungus.

Most types of mold reproduce at an incredible rate. After all, just 1 square meter of a colony throws over a billion spores into space. Because of this, after penetration into the body, the fungus provokes various diseases:

• dermatological diseases that develop as a consequence of an allergic reaction;
• diseases of the upper respiratory tract, including sinusitis, nosebleeds, difficulty breathing, chronic runny nose;
• headache and dizziness;
• diseases of the digestive system;
• anemia and exhaustion of the body.

When a person is constantly in contact with mold, serious diseases develop that lead to disability. Elderly people, those weakened by illness, and children are especially sensitive to such proximity.

Important! You can detect the presence of an allergic reaction to mold by passing the appropriate tests. If the diagnosis is confirmed, measures must be taken to destroy the fungal colony.

What to do with the foundation if groundwater passes nearby

Often the reason for the development of rot is groundwater penetrating into the underground, which is located quite close to the surface of the earth. This factor can be eliminated by a number of actions. If a drainage system was not provided outside, then there will be water on the floor in the basement .
The groundwater level under the foundation of a house can be artificially lowered by installing a drainage system outside. It should be buried below the expected groundwater level, while providing layering . This will prevent moisture from penetrating into the underground and will keep the ground around the house dry. Then fungus is unlikely to appear on the foundation.

Ways to fight

To completely destroy a mold colony, you need to put in a lot of effort and spend a lot of time. Before treating the room with special preparations, it is necessary to eliminate malfunctions in the ventilation system. Adjust the temperature and humidity levels. Otherwise, despite all efforts, the mold will grow again. Only an integrated approach will help destroy the enemy. The fight against mold in the basement is carried out in several stages.

Preparing the premises

Before getting rid of fungus in a cellar or basement, the room is completely cleared of the objects located there. They take out all products, tools and equipment. This will free up the work front and open access to possible places where fungus accumulates. Removed furniture is also treated with special preparations to avoid re-infection.

The cellar room is thoroughly cleaned and all mold is removed. If building structures are deeply affected by fungus, the parts are replaced with new ones. The earthen floor in the cellar is probably already contaminated with mold spores. Therefore, 20 cm of soil is removed and replaced with new one.

The cleaned cellar room is thoroughly dried. Only after this is it treated with special preparations to completely eliminate the fungus.

Destruction of a moldy colony

Simply removing visible mold and removing fungus in the cellar is not enough for complete destruction. Fungal spores have already penetrated into building structures and surfaces. Therefore, to combat mold in the cellar, they are treated with special antifungal and disinfectant preparations. You can purchase such products at construction and hardware stores. In this case, a good result can be achieved using folk recipes against mold. They are effective and do not harm human health.

Sulfur checker

This device kills mold with sulfur dioxide vapor. The device is very easy to use and effective, so it is recommended to use it first. Before processing, all ventilation holes in the cellar are closed to block air access. The checker is then placed in a metal container and set on fire. Immediately after this, the room is left and the entrance is tightly closed. After 5-6 hours, the cellar is ventilated to remove remaining vapors. Then the floor is covered with slaked lime to remove excess moisture.

Important! Sulfur dioxide is not only harmful to mold. It affects the health of humans and domestic animals. Therefore, they must leave home during treatment.

Vinegar

This product has good cleaning ability and destroys mold spores. White undiluted vinegar is poured into a convenient container. Then dip a brush in the liquid and treat all surfaces in the basement. There is no need to wash the substance with water. 12 hours after treatment, the entrance to the basement and ventilation are opened to get rid of the smell.

Bleaching

The method of getting rid of mold using preparations containing chlorine is comparable in its effectiveness to the action of a sulfur bomb. Any product that contains high concentrations of chlorine is suitable for this method. Inexpensive chlorine bleaches, such as Belizna, are usually used. It is diluted in water, adding 10 parts of water to 1 part of the active substance. Then the liquid is applied to all the walls, ceiling and surfaces of the shelving in the cellar.

Lime

Before using lime to remove mold, the cellar is treated with Dezaktin. It is diluted with water according to the instructions and applied to walls, ceilings and other surfaces. Lime is then applied in one of the following ways:

1. 0.5 kg of bleach and 0.2 kg of formaldehyde are dissolved in 10 liters of water. All surfaces in the cellar are coated with this liquid. After this, dry the room and ventilate it.
2. 0.5 kg of slaked lime and 50 g of copper sulfate are diluted in 10 liters of water. A spray bottle is used to distribute this solution.

Lemon acid

Using citric acid, you can successfully fight mold in the basement of a private house. To do this, dissolve 100 grams of crystals in 10 liters of water. The resulting solution is sprayed into the cellar. After this treatment, the room is simply dried.

Copper sulfate

Sometimes treating all surfaces with copper sulfate helps remove fungus in the basement of a wooden house. To do this, prepare a solution of 30 liters of water, 250 g of copper sulfate and 2 kg of quicklime. The liquid is applied to the walls, floor and ceiling in the cellar or basement using a paint roller or brush.

Borax

You can get rid of mold in the cellar, if it has appeared there, using borax powder. To do this, prepare a solution of 3 liters of water and 200 g of borax. All surfaces in the cellar are coated with the prepared liquid. It is suitable for treating an attic, shed, garage or basement. To make the result more effective, the solution is not washed off.

Important! When treating a room with a borax solution, wear rubber gloves, as the drug corrodes the skin.

Grapefruit Seed Extract

Treatment with this substance is more of a preventative measure and helps to avoid mold infection. To prepare the solution, take 0.5 liters of water and pour in 20 drops of grapefruit seed extract. The liquid is poured into a spray bottle and all surfaces in the treated area are sprayed. There is no need to rinse off the composition.

Tea tree oil

Tea tree has antibacterial properties. Therefore, its oil ester is able to remove mold. The product is mixed with water and sprayed throughout the cellar. After a few hours, the drug will take effect and the mold spores will die. There is no need to rinse this product off.

Hydrogen peroxide

Hydrogen peroxide has good antifungal and antibacterial effects. Therefore, it is recommended to use it to clean a room of mold. You can use this tool in two ways:

• mix half and half with water and spray all surfaces in the basement;
• coat the walls, floor and ceiling, as well as shelving with undiluted peroxide.

Bleach with slaked lime

Another effective solution for removing mold is prepared from 1 liter of water, 3 tbsp. l. bleach and the same volume of slaked lime. The liquid is thoroughly mixed and applied to all surfaces in the cellar.

Boric acid

Another good way to solve the problem is to treat the cellar against mold and mildew with a solution containing boric acid. To do this, dissolve 1 kg of salt in 5 liters of warm water and add 100 g of boric acid. The ingredients are mixed until completely dissolved and sprayed throughout the room.

Using an ultraviolet lamp

Another way to remove mold in the cellar is exposure to ultraviolet rays. This treatment method will require a powerful quartz lamp or a bactericidal one. It is installed in the center of the cellar. If the infection is concentrated in one area, the lamp is directed towards this place. Then plug the device into the network and leave it for up to 12 hours.

Important! Ultraviolet rays are harmful to the eyes. Therefore, when working with a quartz lamp, they are protected with special glasses. Immediately after connecting the device to the network, they leave the room.

Cleaning the basement with a vacuum cleaner

To reduce the amount of mold and to prevent allergic diseases due to the impact of its spores, it is useful to clean the cellar room, as well as other rooms in the house, with a vacuum cleaner with a HEPA filter. The pores of such a filter are so small that they can retain not only ordinary dust, but also microscopic fungal spores. Therefore, preventive treatment with a HEPA filter helps get rid of allergens and maintain health.

How to get rid of mold in your basement once and for all

If you simply use chemicals to eliminate mold in your home or basement, sooner or later the mold will come back because you haven't addressed the root cause of the problem in the first place.

The root cause of mold almost always lies in excess moisture in the basement, the root of which is water leaking into the basement or damp base of the walls or slab foundation. In order to get rid of mold once and for all, you need to eliminate existing leaks and reduce the humidity of the walls, foundation and basement floor to a minimum, and this is only possible when you protect all the structures of the underground room from possible exposure to water. This protection is called waterproofing.

Waterproofing can be done both from the inside and outside of the basement or basement.

External waterproofing:

To restore the external protection of an underground structure from water penetration, the following step-by-step actions must be performed:

1. Dig out the building to the bottom of the foundation slab or strip;
2. Remove the insulation and old waterproofing coating (if any);
3. Clean the walls from dirt;
4. Apply high-quality waterproofing to the slab, extending onto the walls 20cm above the ground level;
5. Install the insulation using foam adhesive or other water-based adhesives;
6. Backfill without damaging the insulation.

You can read more about waterproofing a basement from the outside in the article “How to properly waterproof a basement from the outside.”

Additionally recommended:

1. Install a drainage membrane on the insulation - this measure will protect the work performed from damage during backfilling, and will also facilitate additional drainage of water from the house;
2. Install a drainage system 30-50 cm below the foundation level - This measure will help drain both the water that approaches the building from the outside and the water that is located under the building, thereby reducing the water pressure on various building structures.

Diagram of the drainage system and external waterproofing

You can read more about the drainage system in the article - “Turnkey installation of drainage around a house: Proper drainage, its types, installation technologies, materials, diagrams and prices.”
Important: When performing waterproofing work on the outside, you solve the root of the problem, namely moisture getting into the walls, strip or foundation, and its impact on these elements.
Waterproofing from the inside:

If it is impossible to carry out work from the outside, you can always do it from the inside, but do not forget that in this situation you will not be able to solve the root of the problem and sooner or later it may return.

When installing waterproofing from the inside, you must perform the following steps:

1. Repair existing cracks by jointing them, strengthening them with a special sealant and injection;
2. Replenish the cut-off waterproofing of cold slab-to-wall joints by jointing them with layer-by-layer compaction of expanding sealant and injection. Seams are the weakest points of any structure, and it is there that water first begins to pass, and thanks to injection, it will not be able to pass either into the room or through capillaries up the walls;
3. Apply a waterproofing compound that can withstand the negative effects of moisture from the outside to the inside.

Diagram of the waterproofing device from the inside

You can read more about waterproofing the basement from the inside in the article - “Waterproofing the basement from the inside: Methods, materials and stages of work.”

Additional events:

• Humidity control;
• Proper insulation;
• Adequate ventilation in your home.

Precautionary measures

Since most anti-mold products are quite dangerous if handled carelessly, basement treatment is carried out using personal protective equipment. To do this, before starting work, put on rubber gloves, a respirator or mask, and safety glasses. Exposed parts of the body are protected with a special suit.

Solutions prepared for treatment should not be touched or inhaled. After the antifungal solution is applied to the walls and other surfaces, the room must be left and the entrance closed for several hours.

Important! Do not eat foods contaminated with mold. They will definitely be thrown out.

Sulfur checker

The oldest, but no less effective way to destroy fungus in the cellar. Gas vapors spread throughout the entire infested area, which helps remove mold from the walls.

This method is prohibited for use in apartment buildings! May result in criminal liability as you are essentially spraying highly toxic carcinogens over a large area. Be careful!

Approach the matter with caution, guided by the following rules:

• Having a good ventilation system, you will need to tightly close the air shafts - old rags or foam rubber will do just fine. We carry out the same procedure with the basement exit.
• Then the checker is set on fire and remains inside for several hours (preferably from 8 to 12).
• After disinfection is completed, the room will need to be thoroughly dried and ventilated.
• Surfaces exposed to gas vapor will need to be treated with slaked lime.
• Before working with a saber, protect your respiratory organs, eyes, and skin. After setting it on fire, immediately leave the disinfection site. Smoke is POISON!

Prevention

After mold is removed from the cellar, it is important to create conditions under which re-infection of the room will be impossible. To do this, you need to maintain a certain microclimate:

1. Check the quality of ventilation. If it does not work, troubleshoot. If there is no ventilation at all, it needs to be done.
2. The basement is insulated and high-quality waterproofing is created from the outside. It is best to do this during the construction stage, but if desired, work can be carried out after its completion.
3. They make a window that is periodically opened to let sunlight into the room.

There should be good air circulation in the cellar so that it does not stagnate. To do this, install open racks with lattice shelves. All products and things are laid out on these structures so that they do not come into contact with the walls.

It is important to monitor the humidity level. If condensation appears, the room is dried and the cause of its formation is eliminated. It is recommended to monitor temperature and humidity using a household thermometer and hygrometer.

conclusions

Answering the question why disputes often form in the underground spaces of private houses, the main thing is highlighted:

1. High humidity is the main reason. This problem is solved by drying and waterproofing.
2. During construction, no attention is paid to ventilation.
3. Spores live in dark places.

They fight microorganisms using folk methods and specialized means. The spore elimination period takes up to two weeks. For complete removal, the room is cleaned, ventilated and waterproofed. The process of deliverance consists of a set of actions. Includes mold removal and prevention. It can be removed using chemical or folk remedies, and prevention is to keep the room ventilated and dry.

Reviews

Pavel, 45 years old

I recently discovered black mold in the corners of my basement. It turned out that condensation was accumulating on the walls. We had to urgently dry the room, and we got rid of the mold with a sulfur bomb. A very effective remedy.

Igor, 37 years old

Mold developed on the potatoes in the cellar because it was too warm. We ventilated the cellar and adjusted the ventilation. Of course, I had to throw out some of the potatoes. For prevention, all the walls were coated with bleach.

How to remove dampness

First of all, dampness enters the basement through cracks. They need to be found and eliminated by sealing them with cement mortar, which sometimes requires completely dismantling the covering of the ceiling, walls and floor of the cellar. After this, work is carried out on the installation of external and internal waterproofing.

External waterproofing

To prevent moisture from entering the storage facility, it is best to provide external waterproofing during construction. If you need to redo it, restore it or re-equip it, then the concrete base of the cellar is exposed, cleaned, dried and a layer of waterproofing is applied.

In this case, ready-made coating mixtures for waterproofing, primer, reinforcement, roofing felt, polymer membranes, mastics and other materials are used. After completing the work, backfill with sand, gravel and soil, laying geotextiles and drainage pipes. The final stage is the reinforcement and pouring of the blind area.

Internal waterproofing device

To prevent dampness in the basement, properly equipped internal waterproofing is necessary. If it is insufficient, the cellar must be rebuilt as follows. Before starting work, the storage facility is thoroughly dried, coatings are removed from the surfaces, cracks and cracks are sealed with cement. Next, the cellar is treated with antifungal agents and dried again. The floor, walls and ceiling are coated with mastic, the places where there was a leak are treated with alabaster.

The following measures will help enhance the waterproofing effect:

• The cellar walls are being re-plastered.
• Make brickwork at a distance of 3 cm from the walls.
• Ventilation shafts are laid in new walls.

Cement floor

If excess moisture accumulates in a basement with a cement floor, waterproof it as follows. First, the old floor is dismantled, after which the cracks and cracks are eliminated by covering them with cement. The dried surface is covered with a layer of sand or expanded clay 5 cm thick and roofing felt is laid. Additional protection for the cellar will be provided by a special waterproofing film for the floor. Afterwards, a new screed is made, having previously sealed the cracks with bitumen mastic. For convenience, you can install a wooden floor on joists on top of everything.

Clay floor

If the basement of a private house has a clay floor, then its waterproofing is ensured using polyethylene laid in 2 layers. To do this, remove the top layer of clay 5 cm thick, cover the floor and the lower part of the walls with film to a height of about 10 cm and cover it to the same height with a mixture of sawdust and clay in a ratio of 1 to 10. It is necessary to wait for the clay to dry, covering up the cracks that appear, and cover it again with the same layer of clay, this time covering the walls to a height of 25 cm.

During the rainy season

When dampness in the cellar increases directly during the rainy season, without exceeding the norm the rest of the time, the floor is covered with a ten-centimeter layer of sand or gravel, increasing its thickness if necessary. The appearance of condensation on the walls of the cellar can be prevented by covering them with special “breathable” plaster such as “Monolith” or “Ceresit”. To make your own waterproofing mixture, add hydraulic additives to dry plaster, for example, “Tsemaplast” or “Palmix”.

How to strengthen a thin floor

Sometimes the cause of high humidity in the cellar is a thin floor. In this case, the required thickness is achieved by installing a new cement screed, under which roofing material is placed, carefully coating the joints with bitumen mastic.

Treating the basement (cellar) with disinfectant solutions

Whitewashing with fluff lime

When preparing the cellar and basement for winter, do not forget about the need to disinfect its walls, and the choice of treatment method depends only on the material from which the walls of the storage room are made. If the material is brick, then regular whitewashing can be done with a special solution prepared on the basis of lime with the addition of a 5% solution of copper sulfate. In the presence of wooden floors, a solution of 10% copper sulfate is used for treatment. The process of disinfecting a room is carried out using a regular roller or sponge, and a spray bottle is used for hard-to-reach places. After completing the procedures, thoroughly ventilate the cellar.

We use potassium permanganate

In the absence of lime whitewash, a strong solution of potassium permanganate or tobacco decoction can be used to treat the walls (5 tablespoons of tobacco dust are poured into 1 liter of water).

Sulfur checker

An old and proven method for disinfecting a cellar is to use sulfur to fumigate the room. Such work must be carried out in absolutely sealed conditions, otherwise all the work will be in vain. This method of disinfection requires strict compliance with safety precautions, since sulfur dioxide produced during the combustion of sulfur is poisonous to the human body.

Lime vapor

Any affected material is treated with lime. It is often used as a preventive measure against the settling of flowering spores. It can also be used in several ways: a mixture with formaldehyde or copper sulfate.

1. In the first case, 200 grams of formaldehyde and 500 grams of bleach are diluted in a bucket of water. The resulting mixture is used to treat foci of infection.
2. Mixing a kilogram of lime with 100 grams of copper sulfate produces slaked lime, which I use to treat the affected area with a spray bottle.

Microwave method

This is one of the most convenient options for destroying microorganisms. Any dampness in the cellar will be eliminated. The process does not involve the use of chemicals that can harm human health. No matter the number of mushroom colonies, they will all be destroyed, and the spores floating in the air will not be able to settle on the walls.

The principle of operation is that a wall or any surface (floor, parquet, ceiling) is heated in sections of 50 by 50 cm to a temperature of 66-73 degrees Celsius in a very short time. It takes 5-10 minutes to get rid of mycelium at a depth of 30-37 cm.

The advantages of the microwave method directly prevail over other options. All types of small organisms are destroyed; due to the heating of the room to 60 degrees, any microorganisms die. If you have to work with a large quadrature, then it warms up in sections.