10 country problems that a cold fog generator will solve

How to defeat mold in a cellar or basement, treat a greenhouse and a home farm? How to feed the garden, and at the same time protect it from return frosts, diseases and harmful insects? How to get rid of lawn problems? A cold fog generator will solve everything!

Most sprayers spray any, even the most valuable, solution in large drops and thereby waste it. However, today's science, as we know, is in continuous development and, finally, an invention has appeared that can solve this problem, as well as at least ten others.

How does the Defender cold fog generator work?

The operating principle of this mechanism is quite simple. The solution required for processing is poured into the tank, the device is connected to the household network from which its motor runs, and the mechanism is switched to operation mode. The unit converts the solution into a dense cloud of microscopic drops - for this reason it is called a cold fog generator. The sprayed substance is distributed evenly over the entire treated surface, penetrates and settles in the most inaccessible places.

The generator forms microparticles of fog in a certain range, which eliminates the formation of large drops, splashes, streams and nozzle leaks. This effect is also achieved due to the tightness of the spray device. And now more about why every practical summer resident should have a Defender on hand.

Generator operating principle

In order to understand the operating features of such devices, it is suggested that you familiarize yourself with a detailed description of the principle of their operation, which consists in performing the following algorithms:

After turning on the generator, hydraulic pressure begins to be exerted on the liquid; under its pressure, as well as due to the aerodynamic force of the atmosphere , the substance is transformed and takes the form of thin jets.
Due to the constant action of surface tension, the formed streams are torn apart , which contributes to the formation of a large number of microscopic droplets.
The engine with which the equipment is equipped, regardless of its specific type, starts and forces another part of the generator to move - the built-in air compressor.
A two-stage or multi-stage compressor begins to perform the basic functions of a pump. Even with a fairly small air flow, it has the ability to create an impressive compression ratio.
The nozzle responsible for the spraying process has several stages in its design. The initially supplied stream is torn apart by rapid air currents, and then is subjected to a secondary effect of compressed air, which has turbulence directed in the opposite direction.
Thanks to the processes described above, the active substance, converted into droplet form, leaves the nozzle and does not have direct contact with its internal surfaces.
The nozzles have a special structure, which allows them to dose the substance efficiently , so it is sprayed evenly and has a constant flow.

How to disinfect a greenhouse in spring

Greenhouse conditions are favorable for the growth of not only plants, but also various kinds of pathogens - viruses, bacteria, fungi, as well as the spread of harmful insects. Disinfection of greenhouses is necessary to protect crops, their active growth and yield formation. It is carried out both in the fall, after harvesting and removing plant debris, and in the spring, before planting.

How to use a Defender cold fog generator when treating a greenhouse

Clear the greenhouse of plant debris and weeds.
While working, use protective clothing, safety glasses, rubber boots, gloves, a respirator or a mask.
Prepare a working solution of the drug in the required volume and carefully pour it into a special generator tank with a capacity of 10 liters. Connect the generator to a 220 V power supply.
Switch the device into operation mode and begin processing from the far corners of the room, moving towards the exit. Direct the flow of fog onto all structural elements of the greenhouse, as well as onto the ground.
After completing the procedure, leave the greenhouse for several hours, and after that it is advisable not to carry out work in the greenhouse for 3-7 days.
After work, be sure to wash your hands with soap and water.
If re-treatment is necessary, follow the instructions in the instructions for the drug.

To disinfect a greenhouse, it is best to use a solution of Agroyod, copper sulfate or Super-Potassium permanganate.

Reviews

Below are reviews from people who have already used cold fog to remove insects and are now ready to share their impressions of the procedure:

Galina: “For three years we have been unsuccessfully fighting against house bugs. We tried various means against them, used a whole range of measures to treat the apartment, but they did not give any result or only got rid of the parasites for a short period of time; even a control procedure did not help. The last time we decided to call specialists to spray cold fog at home, and this became our salvation. On the same day, they swept away whole heaps of dead insects with a broom, and for six months now, they forgot about the problem of being in the neighborhood with them.”
Svetlana: “After an unsuccessful fight against cockroaches, I decided to use some global method of exterminating them. My brother advised me to call specialists and treat the entire apartment with hot fog, but I still used the cold variety because it is safer and costs much less. When I returned to the apartment after treatment, I was horrified: I thought that this terrible and pungent smell would never disappear. To my reassurance, it disappeared within a few hours after I opened all the windows and doors. The procedure was completely justified, despite the fact that I waited for the cockroaches to return after some time, they disappeared once and for all.”
Evgeniy: “I decided to spare no expense and buy myself a generator for spraying cold fog to get rid of cockroaches in the apartment. I read that I would then need to leave the premises for several hours, but taking into account the fact that I have pets, we decided to refrain from visiting our house for several days so as not to risk it. After treatment, not only cockroaches disappeared, but also small red ants, which were sometimes found in the kitchen and were the lesser of the evils.”

How to feed and protect plants in a greenhouse

Greenhouse plants in spring and summer need feeding, as well as protection from diseases and pests. It is also more convenient to carry out these works using a cold fog generator.

For the first feeding of seedlings after planting them in the greenhouse, do not use a cold fog generator. It is used after the plants have grown and become stronger. Fertilizing is carried out within the time limits specified in the instructions for use of the drugs. Treatment with growth stimulants (Krepen, Kornestim, SuperRASSADA System) is carried out 1-3 times per season, depending on the characteristics of growing a particular crop. Plants are treated against infections according to the instructions included with the preparations used for this purpose.

How to use a Defender cold fog generator for greenhouse plants

While working, use protective clothing, safety glasses, rubber boots, gloves, a respirator or a mask.
Prepare the working solution in the required volume and carefully pour it into a special generator tank with a capacity of 10 liters. Connect the generator to a 220 V power supply.
Switch the device into operation mode and begin processing greenhouse plants. At the same time, try to direct the flow of cold mist over the crown of the plants. If they have reached more than 1 m in height, direct it inside the deciduous tiers, onto the stems. Make sure that small drops of solution on the leaves do not turn into large ones - otherwise there is a risk of burning the plants. Try to prevent the formation of drops and runoff of the solution. To do this, set the fog flow control to minimum power, but gradually increase it if necessary.
For foliar feeding of plants, dilute the fertilizer in a concentration half as low as when applied at the root (unless other rules are specified in the instructions).
After completing the procedure, you should not visit the greenhouse for several hours.
Be sure to wash your hands with soap and water.
If it is necessary to re-treat, refer to the instructions in the instructions for the preparations. The same applies to harvesting from treated plants.

When feeding greenhouse plants, it is best to use the preparations Zdraven turbo and Zdraven-aqua.

Does the type of generator matter?

Besides the variety of insecticides, there are also many types of generators. But specialists use only the following:

Aerosol generators that spray the insecticide in very small droplets and bring them into excessively close contact with parasites.
Generators with centrifugal action. Such generators have a disk structure, the rotation of which ensures the spraying of a chemical preparation.
Ultrasonic generators providing ultrasonic spraying of insecticide. One of the advantages is the almost silent distribution of the substance throughout the apartment.

How to protect your garden from infections and return frosts

When protecting the garden from phytopathogens and insects, plants are sprayed several times a season:

in spring - before buds open, in the pink bud phase and when fruit ovaries appear;
in summer - for prevention or when the first signs of infection appear;
in the fall - after harvest.

The last of these treatments is carried out at a temperature not lower than 5°C. In addition to the trunks and branches of plants, they spray fallen leaves and the surface of the soil in the garden, having previously covered all the cracks in the trees with a protective agent (for example, garden var Zhivinka, garden paint-whitewash Belissa and others). The remaining fruits are removed from the branches. Fallen leaves and carrion are raked and removed from the site.

How to use the Defender cold fog generator when treating the garden

To protect garden plants from diseases using a cold fog generator, it is best to use drugs such as Bacterra, Horus, Skor, Discor, Tiovit Jet, Serpen, Trichoderma Veride. And Alatar, Aktara, Insektor, Corado, Cortlis, Biokill, Stozhar will help against insect pests. It is also very convenient to use the complex series - “Agroprotection system for the garden from pests and diseases”, which includes three sets of preparations: No. 1 – “Early Spring”, No. 2 – “Summer, growing season” and No. 3 – “Bioprotection of the crop”.

Before starting work, organize the cleaning of the gazebo, recreation area, swings and ridges located near the trees - all this must be reliably covered from the solution. Restrict access of children and animals to the site. Work in dry weather without drafts or bright sun.
Wear protective clothing, safety glasses, rubber boots, gloves, a respirator or mask.
Prepare the working solution in the volume required to treat the area and carefully pour it into a special generator tank with a capacity of 10 liters.
Connect the device to a 220 V power supply. Switch the device into operation mode and begin processing.
While the generator is operating, direct the flow of fog onto the leaves of trees and shrubs, as well as into the crown.
Do not over-wet young leaves and ovaries with the preparation to avoid the formation of drops and runoff of the solution from the leaves.
When handling tall trees, use a stable stepladder.
Upon completion of work, you must leave the area for 3-4 hours (while the fog persists). If possible, it is better not to visit the site for three days.

Do not collect berries, fruits from treated trees and shrubs, or vegetables from beds that have been exposed to the working solution for the period specified in the instructions for the product. In accordance with the latter, the garden is re-treated against diseases and pests.

In order to protect the garden from spring frosts, use ordinary water - from the tap, as well as from a well or well. The processing algorithm is no different from that described above, except that in the generator operating mode, the flow of fog is directed to the branches of trees and shrubs, as well as on top of the crown, and not inside it. The treatment is repeated throughout the night, every 10-15 minutes, until morning comes or the air temperature rises. The essence of the method is that microdrops of water that abundantly cover the crown of plants will turn into an ice crust with the onset of frost. The protective effect is manifested in the fact that when 1 g of water is cooled by 1°C, 1 calorie of heat is released, and when it freezes, 80 calories are released. Turning into ice, the water warms the plant, protecting buds and already blooming flowers from frost.

Cold fog treatment is carried out in the evening at a temperature close to 0°C. The resulting steam has a high level of heat capacity. With a small area of land and frosts not lower than –2-4°C, this method helps to save the future harvest. During severe frosts, it is beneficial to spray with cold water so that an ice crust begins to form on the plants as quickly as possible.

How does the device work?

The generator provides spraying of preparations, which, when colliding with the air flow supplied by the compressor, are broken into a fine aerosol suspension, reminiscent of fog in consistency. This processing method is called “cold” because the liquids during the processing process are not heated, during which they are converted into steam, but are sprayed at normal temperatures.

This principle of operation is typical for aerosol generators, and disk or ultrasonic type equipment operates according to a slightly different scheme.

How to compensate for the deficiency of useful elements in garden plants

For full development, plants need a whole set of macro- and microelements. If they are deficient, trees and shrubs will develop slowly and bear fruit poorly. In order to quickly make up for the lack of substances, it is best to use foliar feeding. A cold fog generator will ensure uniform spraying of the nutrient solution over the leaves of fruit plants and shrubs.

How to use a cold fog generator when fertilizing the garden

During the budding phase, it is best to use Zdraven Aqua for fruit trees or Zdraven Turbo for fruit trees and berry bushes, as well as boric acid or Greendale. 5–10 days after flowering, plants with weakened crowns and root systems are fed with Zdraven Aqua for fruit trees or Zdraven Turbo for fruit trees and berry bushes, as well as urea. 2 weeks after the second feeding (in the intervals between the main root feedings), use Zdraven Aqua for fruit trees or Zdraven Turbo for fruit trees and berry bushes.

In the first half of summer, plants are fed with Zdraven Aqua fertilizer for fruit trees or Zdraven Turbo for fruit trees and berry bushes. During intensive fruit growth, plants require boron and calcium (Zdraven Aqua for fruit trees or Zdraven Turbo for fruit trees and berry bushes, as well as calcium nitrate).

3-5 weeks before harvest, plants whose fruits are poorly stored and are prone to glassiness are treated with a solution of calcium salts (calcium nitrate, wood ash).

Autumn spraying is carried out shortly before the leaves fall, using a 4-5% urea solution. This is done to destroy scab spores and some other fungal diseases, but at the same time such spraying is also a kind of foliar feeding. To stimulate the growth and development of plants, it is best to use the preparations PlodoStim, BioSil and Greendale.

Remove unnecessary objects and plant debris from the garden area. Things and neighboring beds must be securely protected from chemicals.
Wear protective clothing, safety glasses, rubber boots, gloves, a respirator or mask.
Prepare the working solution in the volume required to treat the area and carefully pour it into a special generator tank with a capacity of 10 liters.
Connect the device to a 220 V power supply. Switch the device to operation mode and start feeding.
When processing, direct the mist stream onto the branches of trees and shrubs, as well as over the crown. Ideally, the mist should reach both sides of the sheet plate.
Do not allow excessive amounts of the drug to come into contact with young leaves and ovaries. In some cases, this may cause a burn.
After completing the procedure, you must leave the area for 3-4 hours while the fog lingers. After work, be sure to wash your hands with soap and water.
Maintain the interval between treatments specified in the instructions, as well as the allotted time before consuming the fruit.

For foliar feeding of the garden and vegetable garden, the fertilizer is diluted in a weaker concentration - approximately half as much as when applied at the root, unless other rules are specified in the instructions for it. Both sides of the leaf need to be sprayed.

How to treat an area for ixodid ticks

Ixodid ticks are carriers of tick-borne typhus, tick-borne encephalitis, hemorrhagic fever, tularemia and other dangerous diseases. In order to prevent contact of these arachnids with humans and domestic animals, it is necessary to treat the area with special anti-tick preparations, especially if your dacha is located on the border with an abandoned area, wasteland or forest. For preventive purposes, the area is treated even if a tick invasion is not expected this season.

Before going on a picnic, treat in advance an additional area of 6-10 m2 around its location.

How to use a Defender cold fog generator when treating an area for ticks

The drug Ixoder is used to treat areas against ixodid ticks.

The first treatment of the area is carried out after the snow has completely melted and a stable above-zero temperature has been established, but no less than three days before people and domestic animals arrive in this area.
Carry out preliminary preparation for work according to the same principle as when feeding garden plants.
Wear protective clothing, safety glasses, rubber boots, gloves and a particulate respirator. Try not to leave any exposed areas on your body.
After filling the generator tank with solution and connecting the device to a stationary electrical network, switch the device to operation mode and begin processing.
Direct the flow of fog onto the soil and grass, moving in a zigzag from the farthest area to the nearest one and also capturing bushes up to 1 m high. Do not leave untreated areas, spray the perimeter of the area especially carefully.
After completing the procedure, leave the treated area for at least 6-8 hours (or better, at least three days).
Grazing of livestock, picking berries and mushrooms in the treated area is possible no earlier than 40 days after the procedure. During the fight against mites, it is necessary to limit the number of bees for 96-120 hours.
Repeated treatment to prevent the appearance of new mites should be carried out no less than two weeks later.

Defender is equipped with a function for adjusting the flow of cold fog, which can be changed if necessary: to make the pressure stronger or, conversely, to weaken it.

How to prepare an apartment for disinfestation

First of all, household members and animals must leave the apartment, no matter how you look at it, but it’s better to move out for a day. We move all the furniture away from the walls, vacuum and carry out wet cleaning (you don’t want the generator to drive clouds of dust). And the settled solution will be active longer on clean surfaces.

We remove bed linen, curtains and drapes. We send it all along with the soft toys to the wash. Some companies have specialized chambers where you can place toys, etc. for processing.
We clear away the rubble to ensure accessibility throughout the room.
We remove carpets, paintings and decorative elements from the walls.
We turn over and lay out sofas, armchairs, and remove the mattress from the beds.
Let's cover the aquarium, ask about indoor plants, some exterminators say that the treatment will also benefit them from aphids and other parasites.
Pack dishes, food, cosmetics, and personal hygiene products in thick plastic bags.

How to get rid of wasp nests on your property

The presence of wasp nests in country houses poses a serious danger to people and domestic animals, because even a single wasp sting under certain circumstances can cause death. The venom of these insects contains toxins that cause serious illness in people with hypersensitivity: angioedema, subcutaneous hemorrhages, inflammation of the mucous membrane of the eyes, heart pain, and in some cases even asphyxia.

Using a cold fog generator capable of spraying a solution to a height of 4-6 m, you can quickly neutralize insects before they leave the nest.

How to get rid of a wasp's nest using a Defender cold fog generator

During the procedure, the drug Ixoder is used.

Remove unnecessary objects and debris from the treated area. Things and objects must be securely protected from chemicals.
Wear protective clothing, safety glasses, rubber boots, gloves and a particulate respirator. Try not to leave any exposed areas on your body.
Prepare the working solution in the volume required to treat the area and carefully pour it into a special generator tank with a capacity of 10 liters.
Connect the device to a 220 V power supply. Switch the device into operation mode and start processing from the places under the ceiling where the sockets are located, then move in a zigzag from the far corner towards the exit.
After completing the procedure, leave the treated area for at least 6-8 hours. Then ventilate the room thoroughly.

Wasp nests located outside buildings should be handled more carefully. If there are vegetable beds, a playground or a sandbox nearby, they are covered with protective material during treatment.

Harm to people and animals

As already mentioned, this type of generators can be used in rooms where there are plants and animals, excluding only the treatment with toxic drugs. Such equipment is often used not only for the purpose of disinfecting premises and the surrounding area, but can also be used for vaccination.

Harm to people is most likely associated not with the equipment itself, but with the chemical composition of the drugs used for processing. In addition, such generators increase the level of humidity in the treated area, which is completely undesirable for residential premises.

How to kill mosquitoes on your property

Mosquitoes not only cause discomfort to humans with their bites and sound - they can also be carriers of dangerous diseases and cause allergies. Therefore, it is important to process the territory of the summer cottage in a timely manner so as not to have negative consequences.

Treating the area against mosquitoes can be combined with spraying against ixodid ticks.

How to get rid of mosquitoes using a Defender cold fog generator

The drug Ixoder is used to treat areas against mosquitoes.

Clear the area to be treated of debris and unnecessary vegetation.
Wear protective clothing, safety glasses, rubber boots, gloves and a particulate respirator. Try not to leave any exposed areas on your body.
Prepare the working solution in the volume required to treat the area and carefully pour it into a special generator tank with a capacity of 10 liters.
Connect the device to a 220 V power supply, switch it to operation mode and process the area, starting from its far corners and zigzag moving towards the exit. Also capture shrubs up to 1 m high. Particularly carefully treat the perimeter of the site and places of potential accumulation of larvae (ditches, pipes, drainage systems, drainage barrels).
Upon completion of work, you must leave the site for 3-4 hours. If possible, it is better not to visit the site for three days.
If a new generation of mosquitoes is detected, repeat the treatment after two weeks. It is recommended to treat the area no more than three times during the season.

You cannot cultivate land allocated for agricultural crops, playgrounds and sandboxes, as well as areas located within a radius of 50 m from fishing reservoirs. Grazing of livestock, picking berries and mushrooms in the treated area is permitted no earlier than 40 days after treatment. During the work, it is necessary to limit the number of bees to 96-120 hours.

How to get rid of lawn problems

The lawn needs care no less than all other areas of the dacha. Without timely feeding and treatment, lawn grass loses its density and richness of color, turns yellow and dies from improper watering and winter frosts, and is colonized by weeds. A cold fog generator in combination with fertilizers and preparations to protect the lawn from weeds and diseases will simplify lawn care and make work quick and convenient.

Before sowing the lawn, treat the soil with general-killing herbicides (Hurricane Forte, Chistogryad). To kill weeds on a growing lawn, use selective herbicides (Lintur, Bis-300) that do not have a negative effect on lawn grasses. If weeds rarely appear on the lawn, they are removed manually. Before treating with herbicides, do not mow the grass for 7-10 days so that the weeds are clearly recognizable. After treatment with fertilizers, you should also not mow the grass for 5-7 days for better absorption of nutrients.

How to treat your lawn with a Defender cold fog generator

Wear protective clothing, safety glasses, rubber boots, gloves and a particulate respirator. Try not to leave any exposed areas on your body.
Prepare the working solution in the volume required to treat the area and carefully pour it into a special generator tank with a capacity of 10 liters.
Connect the device to a 220 V power supply, switch it to operation mode and process the lawn, starting from its far corners, trying not to get into neighboring areas.
After completing the procedure, leave the area for several days (when treating with herbicides). After work, be sure to wash your face and hands with soap and water.

After working with any of the solutions, you must wash your hands and face with soap and rinse your mouth. In case of contact with eyes, rinse with water or 2% baking soda solution. In case of contact with skin, wash off first with water, then rinse thoroughly with soap and rinse. If swallowed, drink 1-2 glasses of water with 10-20 tablets of activated carbon. If inhaled, rinse your mouth with water or a 2% baking soda solution, and then drink 1-2 glasses of water with 10 tablets of activated charcoal.

How to disinfect a chicken coop

The proliferation of dangerous microorganisms inside the poultry house is caused by rotting droppings, fallen feathers and food debris. Since, due to their nature, chickens do not have strong immunity, during an epidemic caused by dangerous diseases (pasteurellosis, salmonellosis, pullorosis and others), their mortality occurs on a large scale. Disease carriers can be insects and rodents living on the farm. Regular disinfection of the chicken coop using a cold fog generator will help prevent dangerous diseases, some of which can also be dangerous for humans.

How to use the Defender cold fog generator when treating a poultry house

Do a general cleaning of the farm.
Prepare a working solution in the amount required to treat your area and carefully pour it into a special generator tank with a capacity of 10 liters.
Connect the generator to a 220 V power supply and carry out sanitization in the same way as in the case of the cellar.

The cold fog generator can also be used as an aerosol to vaccinate poultry and other animals, as well as to aerate eggs in an incubator.

What is the difference from the hot fog method?

Many people, when choosing a method for exterminating insects, wonder about the differences between using hot and cold types of fog.

They usually consist of the following nuances:

To spray cold fog, smaller equipment is used , since its design does not contain additional mechanisms designed to preheat the filled insecticide.
When using hot fog, an aerosol cloud is also created , but the particles included in it are much smaller in size.
All equipment designed for spraying hot fog is exclusively professional and is intended for use only by specialists from the relevant services, while cold fog generators can be used by anyone.
Hot fog generators can be placed outdoors , and the sprayed substance can be launched indoors through specially installed pipes. This technique is used for high-quality processing of the largest premises.
Cold fog generators are much cheaper.
Hot fog is much less suitable for killing insects inside residential areas.

Despite the difference in cost, a number of fundamental differences, as well as the fact that the hot cloud stays in the air longer, due to which its particles have time to come into contact with absolutely all surrounding objects, the difference in results between these methods is insignificant. The same positive result is achieved in both cases.

How to get rid of mold in a cellar or basement

If there is no high-quality ventilation in the basement or cellar, then it becomes a haven of dampness, mold, and subsequently rodents. Disinfecting the basement using a cold fog generator allows you to protect the room and the things and products left in it for storage.

The working solution is prepared in accordance with the instructions for preparations intended for treating premises. When preparing, keep in mind that the generator tank holds 10 liters of solution. The solution cannot be stored and it is prohibited to use food containers when preparing it. All rooms, as well as open areas on the site, should be treated only in the absence of people and animals, in dry, windless and cool weather.

How to use a Defender cold fog generator when treating cellars and basements

First, hermetically pack the items and cans of preserves that are in the cellar. Close windows, turn off hoods and air circulation systems. Wear cotton overalls, safety glasses, rubber boots, gloves and a respirator.
Prepare the working solution in the required volume and carefully pour it into a special generator tank with a capacity of 10 liters. Connect the generator to a 220 V power supply.
Switch the device into operation mode and begin processing from the far corners of the room, moving towards the exit. If your cellar is small, simply lower the generator boom into the inlet and spray.
For disinfection, it is necessary to direct a flow of fog to all structural elements: ventilation system, walls, ceilings, floor and ceiling. Pay special attention to areas affected by fungus and mold. They may require additional processing.
After completing the procedure, leave the room for 3-4 hours until the fog disappears.
After work, remove protective clothing and wash your hands with soap and water.

While working with a cold fog generator, regardless of its nature and location, you should not eat or drink, or smoke.

Fortunately for summer residents, this indispensable household device is already on sale. The Defender cold fog generator can be purchased in the OBI store chain, as well as in the Agrosemfond online store.

Types and overview of models

All modern models of generators designed for spraying cold fog can be divided into two main types:

Professional equipment that is intended for use by employees of the relevant services. In most cases, it is used to destroy pests on the territory of industrial enterprises, warehouse and logistics centers, agricultural buildings or other premises with a large area.
Household equipment that anyone can use to kill parasites in their dacha or apartment. It is freely available and most often has affordable prices.

For use at home, a household variety will be quite sufficient, and in order to make it easier to navigate when making a choice before purchasing, some of the modern models are discussed below:

Generator OR-DP1

It is one of the most budget options, which has passed all the necessary certification and is actively used in many countries. It operates on the same principle as other analogues; it can be used to destroy existing parasites or carry out preventive measures. The cost of the equipment is about 14,500 rubles.

Storm Generator

It has an improved design and is equipped with three working nozzles at once, which significantly increases the quality of fog spraying indoors. The device is equipped with a powerful engine and has the ability to equally process both small and medium-sized rooms. The approximate cost is 27,000 rubles.

Hurricane Generator

It has three nozzles, which are additionally equipped with a special nylon coating on the inside. It is a universal equipment that is compatible with most modern insecticides. It can be used with both liquid substances and those with an oily and thick structure. The approximate price for this model is about 45,000 rubles.