Anti franchise Dry fog. How to really make money removing odors using dry fog.

Fog generators, regardless of their type, are mobile or hand-held equipment designed to distribute insecticides in the treated area.

They operate on the principle of an aerosol; one of the most common types are devices that create cold fog , since, unlike the hot variety, it is much safer and more suitable for use indoors of various types.

Equipment of this type performs the following main functions:

1. Effective destruction of all types of parasites and pests , toxic fog affects both mice and rats, and various types of insects, as well as arthropods, microorganisms and fungal formations.
2. Providing long-term protection of plants , trees, shrubs and crops from the harmful effects of any type of parasites.
3. Distribution of liquid-type fertilizer mixtures over long distances.
4. Protection of various products and edibles intended for long-term storage.
5. Carrying out high-quality disinfection indoors.
6. Combating stagnant foreign odors.
7. Reducing the number of germs and spores in the air.

What is dry fog

Dry fog service is a unique technology for eliminating odors: conventional deodorization is becoming a thing of the past

How often have you encountered the problem of unpleasant odor in your home, apartment, gym or office? Unfortunately, not all “odors” are pleasant to our sense of smell, and the fight against them is sometimes doomed to failure, especially if the smell has stagnated. Removing odors in an apartment using deodorants does not bring the desired result. Such products are not able to completely destroy microscopic particles that settle on walls, furniture, in corners and crevices. Since the particle sizes are much larger than the sizes of the cracks and pores where unpleasant odors are hidden. They temporarily close the pores and when they disappear, the unpleasant smell reappears. To do this, deodorization must be based on a slightly different principle than simply eliminating the smell.

Dry fog treatment with Burgess Thermo-Fogger for your sensitive sense of smell

Smell is one of the six senses on which we are accustomed to rely entirely. And if we can easily determine the source of the unpleasant odor, then it is not always possible to cope with the consequences with the help of ordinary deodorization of the room. The principle of conventional deodorants and air fresheners is to interrupt the smell, and not to destroy it. Ventilating the room in this case helps only for a short period. And if this happens in winter, when opening windows is a real feat (no one wants to freeze), cleaning the room from odors is a more than urgent problem. In addition, heating an apartment is a rather lengthy and energy-consuming process. In this case, when using a steam generator, you, among other things, save on heating your living space.

But there is a solution! After all, research continues, new technologies are invented, as evidenced by the appearance of the latest neutralizing fogger Burgess Thermo-Fogger, which eliminates unpleasant odors.

The basic operating principle of the Burgess Thermo-Fogger is the use of a special liquid called Harvard Odor Destroyers, which creates a “dry fog” under pressure. The resulting “dry fog” reliably binds to the molecules of the unpleasant odor, binding them. At the end of the procedure, be sure to ventilate the room. This procedure is much more effective and efficient than air ozonation or quartzization, since Thermo-Fogger works with any type of odors.

How the Burgess Thermo-Fogger fog generator works

A special fog generator must be filled with professional liquid Harvard Odor Destroyers, which was developed by leading chemists from Harvard University in the USA. The device then converts it into “dry fog,” which consists of tiny particles. Their fraction is significantly smaller than the size of the molecules that make up household odors. Due to this and the sufficiently high density of the fog, pathogenic molecules are reliably bound. The generator, powered by Harvard Odor Destroyers fluid, creates a mist that is completely dry at the exit. It fills the entire space, like smoke, but with a high concentration. After treatment there will be no marks on any surface - furniture, linoleum, fabric or parquet.

The “dry fog” created by the fog generator is 100% safe for adults and children. You don't have to be afraid to treat surfaces in your children's room. The safety of the liquid and mist obtained at the outlet is confirmed by the relevant certificates of the USA and the Russian Federation. It is also harmless to animals.

Difference from hot fog

The fog can be cold or hot. The mechanics of the method are the same - the drug is sprayed through a special generator. Key differences between these two types

Hot fog has greater penetrating power than cold fog and is more volatile. Due to the fact that the generator is manual, it is usually used in small areas. The cold fog method for cockroaches is suitable for rooms of any size and purpose. The optimal method of disinfestation is selected before carrying out work.

Basics

1 It is important at the first stage to choose a real “ dry fog ” that will not let you down and will actually remove odors, and the equipment will work stably.

real “dry fog” for removing odors: Harvard Odor Destroyers from Harvard Chemical Research, Inc and ODORx Thermo55 from ProPestore. And the equipment is a thermal fogger Thermo-Fogger Burgess F-990 Dezfog.

Specialists from Harvard Chemical Research and engineers from Burgess (USA, thefountainheadgroup Group) modified the Burgess F-982 fogger especially for Desfog. Now we have a new version of the Burgess F-990 Dezfog equipment with modifications to the nozzle and reinforced parts of the equipment

We are now the only dealer outside the US for thefountainheadgroup Group to sell Burgess equipment.

Beware of outbid dealers who call themselves officials.

From October 2022 to April 12, 2022 there was a Burgess F-982 fogger for Desfog with a 220V molded plug and a setting for a drier fog that leaves no trace at a distance of 30 cm from the surface.

When choosing a fogger, be sure to ensure that it can operate on a 220-volt network.

The fogger should be marked like this.

And the fogger fork must be cast with DSGS marking

The CEO of Paradem entered into an agreement for the direct supply of Burgess thermal foggers from the USA.

Discussion with the chief designer of the issue of improving the BURGESS F-982 fogger for the exclusive HARVARD CHEMICAL RESEARCH liquid, developed jointly with Desfog.

Lately we have been receiving messages asking how to work with 120V Burgess foggers. These foggers are sold for the US market. We assumed that people were buying them privately in the US.

And having looked into it, we found out that there is a company in Russia that imports 120V foggers from the USA and sells them under the guise and description of 220V. If the client does not understand that the voltage is different and immediately turns it on to the 220V network, then such a fogger will immediately burn out.

We were approached by a client of theirs who took them at their word and bought a 120V fogger, thinking it was 220V. As a result, the fogger burned out the first time it was plugged into the network.

And if the client understands that he was deceived, then he looks for a converter from 120V to 220V, and this adds another 5,000 -6,000 rubles to the cost of the fogger. As a result, the fogger cost 30,000 rubles. And you also need to wear it with rubber gloves if you do not ground the converter.

How to choose an inverter for the Burgess F-990 Dezfog fogger to work on the road and not depend on an outlet.

Burgess F-990 Dezfog is specially adapted for Harvard Odor Destroyers fluids . ODORx Thermo55 fluids can be used in the fogger with certain assumptions.

From 2009 to 2014, we used ODORx Thermo55 fluids from ProPestore. Having gained a lot of practice, we have identified a number of shortcomings of this liquid. We started looking for a replacement. In 2015, Harvard Chemical Research, Inc. began selling Harvard Odor Destroyers

Why should you only use Harvard Odor Destroyers fluids in your Burgess F-982 Fogger?

In our work we use Harvard liquids and Burgess fogger for the following 3 reasons:

1) Harvard liquids do not leave residue on surfaces after treatment . Harvard liquid itself, when wetted on fabrics after drying, does not leave streaks or stains. ODORx Thermo55 liquid leaves a continuous residue. In the room you have to cover all glossy surfaces. And in the car, wipe all surfaces after treatment.

2) Harvard liquids have a smooth and pleasant odor after processing, due to the composition based on saturated aliphatic hydrocarbons . ODORx Thermo55 liquid has a strong sweet smell due to its composition based on aromatic hydrocarbons. It is necessary to ventilate well for 2-3 days.

3) Harvard liquids cause little clogging of the fogger; simple cleaning once a month is enough . ODORx Thermo55 liquid clogs the fogger a lot, especially citrus liquid. Needs to be cleaned 1-2 times a week.

This video clearly shows the main features of the ODORx Thermo55 liquid . In this video, Russian guys from the USA are using a 120 volt fogger connected to the local power grid. At 17 seconds you can see a 3-prong plug.

1) Oil deposits on all surfaces, which must then be wiped, otherwise the client will stain his clothes. Time from 2-14 to 3-00, from 3-30 to 4-00

2) Strong cloying odor from 2-14 to 2-16

3) Heavily contaminates the nozzle 0-07 to 0-08

2 It is important to understand that dry fog technology removes odors. It does not aromatize or disinfect. That is, the business needs to be built on removing odors with “ dry fog ” .

Dry fog removes odors if the source of the odor is removed. After treatment, only a residual odor from the applied liquid remains, which can last from 2 hours to 30 days. That is, one cannot guarantee that in a certain case it will last “for that long.” And for aromatization, a constant level of aroma and a certain time of its presence in the room are important.

Read the article Why it is not profitable to do aromatization with dry fog

3 It is important to correctly determine the strength of the odor being removed.

The strength of the smell is determined by your sense of smell. For example, you treated 3 cars for the smell of tobacco, where the first car had a strong odor, the second car had a medium odor, and the third car had a weak odor. That is, you need to have practice in determining the level of odor. Thus, in order to better remove odors at the initial stage, all cases must be equated to a higher than average odor. And with practice, you will be able to reduce fluid consumption and rank odors by their strength based on your experience.

Thus, if you have mastered all 3 points of the Basics, you will be able to successfully practice “dry fog”. If even one point is not clear to you, then you shouldn’t even start. In this case, you definitely need to consult us.

And these are not just words - it has been tested by our clients. It is better to learn from the mistakes of others than from your own.

Safety of using dry fog technology.

Dry fog fluid may cause irritation if it comes into contact with the eyes, respiratory system or skin. The liquid in the form of a mist already has such a small effect on the organs of vision and breathing, as well as the skin, that during processing it is conditionally permissible to work without protective equipment. In all the videos we work without protective equipment both indoors and in cars. We have been working with “dry fog” from the USA since 2009. Since 2014, Harvard Odor Destroyers began to be used. After treatment, after 1 hour indoors and 30 minutes in a car, the effect remains at the level of perception of the residual odor of the liquid used.

According to safety precautions, you need to protect your respiratory organs, eyesight and skin.

Certificates

What is it used for?

The cold fog generator is widely used in the following cases:

1. for the purpose of disinsection of houses and apartments;

2. for the purpose of processing industrial buildings and warehouse complexes;

3. for the purpose of disinsection of office premises;

4. for the purpose of processing veterinary, plant growing, agricultural premises;

5. for the purpose of disinfestation of buses, cars and trucks, aircraft;

6. for the purpose of processing railway transport;

7. for the purpose of treating garden crops against pests in areas located in open areas, and so on.

In addition, a cold fog generator can be used to treat rooms to get rid of unpleasant odors, spray fertilizers, and the like.

Where can dry fog be used?

In order not to list all possible places of use, we will provide a diagram that makes it easy to understand where “dry fog” can be used. The premises ( hereinafter refers to both premises and vehicles ) must have the following characteristics:

1. Must be closed. (Windows, doors, cracks, vents, ventilation, etc.: everything that can reduce the concentration of fog should be turned off, closed, sealed, etc.) Examples of such objects: vehicles and premises.

Such objects do not include: open verandas, open-top cars, motorcycles, etc.

2. Must be safe . (There should be no sources of open fire or open heating elements) Examples of such objects: fireplaces, drying rooms, saunas and baths without heating sources turned on.

Such objects do not include: premises with gas boilers without the ability to turn off

3. Must be accessible. (It is necessary to turn off the fire alarm - it is triggered by fog; turn off or close the ventilation system. During processing and ventilation, people and animals should not be in the room) Examples of such objects: premises of large stores, shopping centers, fitness centers, etc.

Such objects do not include: guarded premises, sensitive facilities, pet stores (where animals cannot be removed), hospitals with bedridden patients.

The nuances of killing insects using the cold fog method

Today, the destruction of various types of insects using a similar technique is very common, while many citizens carry out cold fog treatment on their own, having purchased the necessary equipment for this.

The processing process also has a number of nuances and features that you need to know:

1. When choosing certain types of insecticides, it is allowed to spray the active substance in the presence of domestic animals , if the treatment is carried out in livestock buildings.
2. The installation location of the mobile generator must be carefully thought out so that when it is turned on, it covers the maximum possible territory , and there should not be any foreign objects in the path of its movement that could interfere with the procedure.
3. Treatment is carried out from the farthest corners and areas of the premises ; as the fog spreads, it is necessary to move closer to the exit to the street.
4. When using stationary models, it is necessary to place them so that the spray point is at least 1.5-2 meters above the floor surface. This is due to the fact that the aerosol spreads from top to bottom, so care must be taken to cover as much space as possible.
5. When treating rooms with very high ceilings, the height of which is three meters or more, it is necessary to position the nozzle so that it is at a certain angle relative to the horizontal surface. The angle parameters are calculated directly on site, this is done so that the active substance can spread as far as possible when sprayed.
6. Various types of substances can be used to create a cold mist, but emulsion concentrates are the most recommended, and wettable powders are best avoided. This is due to the fact that the emulsion is capable of creating droplets, the dimensions of which are ideal for spraying using the aerosol principle.
7. The choice of substance is based not only on the type of insect that needs to be destroyed, but also on recommendations related to the standards for using this product when carrying out regular spraying with it.
8. If greenhouses or other premises in which plants are located are subject to treatment when exterminating insects, then the mist jets should be directed over them, since excessive direct contact may result in an overdose of toxic components or burns, which can cause the death of the treated crops.
9. If there are circulation fans inside the room being treated, then it is not necessary to use mobile equipment , and spraying can be carried out from one point. The ventilation system will independently and evenly distribute the insecticide over the entire area.
10. The most favorable temperature range for using cold fog is considered to be the range of +18-29°C. It is also recommended to refrain from the procedure if the air humidity in the room is too high. In this case, you will first need to carry out certain measures to reduce this indicator, and then implement the processing.

What odors does dry fog remove?

(lists all types of odors that have ever been removed by the Harvard Odor Destroyer Dry Fog)

Dry Fog removes various types of odors:

smoke (after a fire where wood, paper, plastic windows, household appliances, wiring, etc. burned, including from the smoke of tobacco, cigarettes, cigars, hookah);

organic (smells of rotting or spoiled food, fish, meat, poultry, vegetables, fruits; odors of oil and fat; odors from animal and human urine; odors from animals and their fur; odors of rotting plants, grass, leaves; odors of beer, vodka and other alcohol; smells of elderly and sick people; smells of sweat, vomit);

chemical (odors of paint, varnish, kerosene, gasoline, diesel fuel, diesel fuel, plastic, linoleum, laminate, rubber; smells of insect removers; smells of plastic of a new car);

mixed (smells of new furniture, garbage, repairs, dampness, mustiness, sewage; after cooking);

removing odor from things (outerwear, hats, bags, shoes, leather, fur products, etc.)

Use dry fog liquids that are specialized for the odors they remove.

Consumption and calculation for cars

In your work, use the Instructions for the use of dry fog technology for treating cars

What will be the effective practical fluid consumption for the interior of a sedan-type car?

First you need to understand what the interior of a car is like. This is not an enclosed space with thick walls. This is a thin body with air ducts, assembled from parts that do not always fit together exactly and have gaps. In the interior of a moving car, ventilation or air conditioning is almost always running. For example, in Yakutsk and other northern cities with normal daytime winter temperatures of minus 30 below zero, they don’t turn off the engine at all outside. And they store cars in warm garages.

Volume of an average car using the example of Kia Rio

The approximate external dimensions of the cabin and trunk are 3,545 m * 1,300 m * 1,700 m = 7.82 m3 - the volume of the car interior. If you subtract the rear wheel arch and seat shells from this, you get approximately 6 m3, which will need to be treated with “dry fog”.

If you consider the consumption of a car as a room, it turns out that you need to use at least 1.5 ml per 1 m3. Thus, you need to use at least 9 ml for the Kia Rio interior. This amount of liquid will be consumed in 4 seconds. You can watch any video of dry fog treatment and see that this amount, or even more, simply goes through open doors.

But the car is not airtight as a room, and to “fog” it you need to open the doors. When fogging a room, you are inside, not behind an open window or door, and work from there. Therefore, in order to fill the car with the necessary volume for effective odor removal, you need to spend 4-5 times more than indoors. This was practically tested on different types of cars, which were provided by clients of the mobile odor removal service aromavto.rf for 1 year.

Thus, the minimum consumption per car is 36-45 ml, and on average 40 ml. This is what we indicate in the processing instructions. According to the strength of the odor removed, the consumption per car is 40-60-80 ml (weak-medium-strong). As a result, from one 950 ml bottle you can treat a maximum of 24 cars and a minimum of 12 cars (if the smell is strong).

The cost of the liquid is about 2 rubles per 1 ml: 2000 rubles /950 ml = 2.1

Cost of processing one car: from 80 to 160 rubles (if there is a strong smell) // (40-60-80 ml)*2

The cost of processing 1 sedan type car starts from 500 rubles. The cost of processing in different cities can be viewed on the website aromavto.rf (download the price list on the main page via the link https://aromavto.rf/uslugina24.09.2019.xls)

From one 950 ml bottle you can earn 12,000 rubles // (24 cars x 500 rubles)

Minus the cost of 1,920 rubles, you get a profit of 10,080 rubles.

How many cars can be processed per unit of time?

One day is equal to 14 hours of working time, from 8 am to 10 pm. You ask us: “Why not 8 hours?” From our experience in Moscow there were orders for 8 am and 10 pm. In this amount of time, you can go out and process up to 8-10 cars of different clients at different addresses. It takes 40 minutes to process one car. (Tested by specialists aromavto.rf)

Thus, if you process different cars at different addresses, the entire procedure will take 40 minutes. If you have collected more than one car at one address, then by turning on and preparing the fogger, you will process each car with breaks of 2 minutes if you need to change the type of liquid for the next car.

As a result, 15 cars can be processed in 1 hour of conditional time. They must stand in the “fog” for 30 minutes and the transition from car to car takes 2 minutes. After continuous operation of the fogger for an hour, you need to give the fogger time to rest for 10-15 minutes by unplugging it from the outlet.

Thus, in 75 minutes you can process 15 cars at once and earn 7,500 rubles. Earning speed is 100 rubles per minute. For a standard 8-hour working day you can earn 48,000 rubles.

This result is achieved thanks to the reliable equipment of the Burgess company - an electric thermal fogger, model F-990 Dezfog.

It is capable of operating in the following mode: you can constantly hold the lever “ON” for 15-20 seconds, then take a break for 2-4 seconds. Working time is 1-1.3 hours, then a break of 10-15 minutes. Any other equipment is not capable of working like this.

To get started, you need a minimum set: an electric fogger Burgess F-990 Dezfog and 5 0.95 liter bottles of Harvard Odor Destroyer with types of liquids: New car, Orange, Anti-tobacco, Cinnamon, California Flowers. These are the main liquids used to remove common car odors. This set costs 33,000 rubles. You can place your order in the product card Dry fog anti-odor kit - Thermo-Fogger F-990 Dezfog with Harvard Odor Destroyers liquid

Economical start with 0.25 liter bottles at 900 rubles per bottle. A set of 5 liquids will cost 4,500 rubles, instead of 10,000 rubles. Your savings will be 5,500 rubles. Quick start from RUB 23,900

With the Burgess F-990 Dezfog electric fogger you can buy 1-2 bottles of dry fog. The fogger will cost 23,000 rubles , and liquid 0.95 l - 2,300 rubles, 3.8 l - 7,900 rubles. Thus, to get started, it is enough to buy a fogger and 1 bottle of 0.95 l, which will cost only 25,300 rubles. But buying fog and equipment in a minimal set will be cheaper from 1,200 rubles than the same items separately.

The kit includes 0.95 liters of liquid - 2,000 rubles each, 3.8 liters - 7,600 rubles each. Thus, by purchasing a kit you save from 1200 rubles per bottle of 0.95 l and 3.8 l

The kit may contain at least 4 types of liquids. At least 4 of only one type of liquid. Choice of 12 types of liquids: Arizona Energy, California Flowers, Cream Vanilla, Orange, Cinnamon, Rose, New Auto, Black Ice, Coffee, Anti Tobacco, Bazooka Bubble Gum, Kansas Grass.

Also, if you want to add any other types of liquid to such a kit, then the cost of each new bottle added will be less than separately at retail. For 0.95 l - 2,000 rubles, for 3.8 l - 7,600 rubles.

Disinfection of the food industry

The food and processing industries, butchers, bakeries, wholesale and retail grocery stores, hotels and catering establishments place particularly high demands on the quality of products, their shelf life and their microbiological safety. Enterprises of this kind are required to have a professional hygiene control system, which includes thorough, high-quality cleaning and disinfection. Therefore, you may need a disinfection device!

Thanks to their technical characteristics, stationary and portable aerosol generators of hot and cold fog from IGEBA (devices for disinfection of premises) are an ideal solution for disinfection and pest control. Uniform distribution of the disinfectant, constant operating speed and uniform flow of the working solution guarantee efficient distribution of droplets in the air. In this way, not only all surfaces and tools are disinfected, but also the air in the room as a whole.

Disinfectants specially developed for the food industry allow you to quickly and effectively treat even refrigerators. At the same time, the main requirement for the product used is that it is harmless to human health and the quality of food products. When processing, be sure to take into account the rules of use and concentration standards of the product specified by the manufacturer. Let's take a closer look at the possibilities of cold and hot fog for disinfecting rooms and open spaces.

The cold fog treatment method is most widespread due to its safety for people and animals. This allows processing in residential premises and agricultural premises in the presence of animals and is its undeniable advantage.

Consumption and calculation for premises

In your work, use the Instructions for the use of dry fog technology for treating premises

The room is more airtight compared to a car. Therefore, the consumption per 1 m3 is significantly less.

For convenience of calculation and use of its result, the cost of treatment is indicated in m2, and the consumption of dry fog in m3.

The client better understands the price per m2. The area of ​​a room is easier to imagine than its volume. For the client, this is a more transparent accounting system. Basically all rooms have a height of 2.7 -3 m

And the consumption of dry fog is taken into account in m3, as this is convenient for calculation by a processing specialist.

Let's consider the premises using the example of a one-room apartment

Apartment 35 m2 with ceilings 2.75 m

Consumption according to odor strength is 1.5 ml - 2.2 ml per m3. For severe cases up to 3 ml

Total volume of the room = 96.3 m3. Consumption for the entire volume is 144.5 - 212 ml. For severe cases 289 ml.

The cost of processing 1 m2 is calculated as follows:.

There are 3 m3 in 1 m2, if the ceilings are 3 m. Consumption per m3 is from 1.5 to 2.2 ml, depending on the strength of the odor. The cost of 1 ml is 2 rubles

It turns out that the cost of processing 1 m2 is equal to

3 m3 * 1.5 ml * 2 rubles = 9 rubles for weak odor strength

3 m3 * 2.2 ml * 2 rubles = 13.2 rubles for medium odor strength

3 m3 * 3.0 ml * 2 RUR = 18 RUR for a strong scent

The price of processing 1 m2 for a client starts from 40 rubles

What is the maximum volume of room that can be processed?

We are often asked the question: “Do you have a fogger with more power to handle larger spaces?”

The Burgess F-990 Dezfog fogger can handle rooms of any size. You don't need to make sure that the "fog" fills the room. You only need to monitor consumption by volume. We calculated the volume of the room and calculated what the consumption would be. And that’s exactly how much you need to spend on this room.

How to control fluid flow?

Indeed, how can you tell, because there is no timer and you cannot immediately determine the volume of the room.

1) Dry fog consumption in the Burgess F-990 Dezfog fogger is on average 2 ml per 1 second. Determined in a simple way. You need to pour liquid for “dry fog” into a measuring cup and work for 10 seconds, and then measure what the flow rate was.

2) The volume of the room can be quickly determined using a laser rangefinder. We use a rangefinder with a volume calculation function, where we need to determine the length, width and height.

3) Calculations. Multiply the volume of the room by the consumption according to the strength of the smell. Divide the result by the flow rate of ml per 1 second.

For example, the area of ​​a one-room apartment is 37 m2 and the ceilings are 2.7 m, then the volume is almost 100 m3.

We calculate the processing time for such a room: 100 m3 * 2.2 ml consumption by odor strength = 220 ml. 220 ml / 2 ml consumption ml in 1 second = 110 seconds and divided by 60 seconds = 1.8 minutes. As a result, for a one-room apartment of 37 m2, you need to spend 1.8 minutes on “fogging”.

To start work, a minimum set is required: a Burgess electric fogger and 5 0.95 liter bottles of Harvard Odor Destroyer with types of liquids: Orange, California flowers, Anti-tobacco, Cinnamon, New car. These are the main types of liquids used to remove common indoor odors. This set costs 33,000 rubles. You can place your order in the product card Dry Odor Mist Kit - Thermo-Fogger with Harvard Odor Destroyers Liquid

Economical start with 0.25 liter bottles at 900 rubles per bottle. A set of 5 liquids will cost 4,500 rubles, instead of 10,000 rubles. Your savings will be 5,500 rubles. Quick start from RUB 23,900

With the Burgess F-990 Dezfog electric fogger you can buy 1-2 bottles of dry fog. The fogger will cost 23,000 rubles , and liquid 0.95 l - 2,300 rubles, 3.8 l - 7,900 rubles. Thus, to get started, it is enough to buy a fogger and 1 bottle of 0.95 l, which will cost only 25,300 rubles. But buying fog and equipment in a minimal set will be cheaper from 1,200 rubles than the same items separately.

The kit includes 0.95 liters of liquid - 2,000 rubles each, 3.8 liters - 7,600 rubles each. Thus, by purchasing a kit you save from 1200 rubles per bottle of 0.95 l and 3.8 l

The kit may contain at least 4 types of liquids. At least 4 of only one type of liquid. Choice of 12 types of liquid: Arizona Energy, California Flowers, Cream Vanilla, Orange, Cinnamon, Rose, New Auto, Black Ice, Coffee, Anti Tobacco, Bazooka Bubble Gum, Kansas Grass.

Also, if you want to add any other types of liquids to such a kit, then the cost of each new bottle added will be less than separately at retail. For 0.95 l - 2,000 rubles, for 3.8 l - 7,600 rubles.

Rating of the most popular models of cold spark generators

DJ Power V-4

The device is equipped with a special waterproof stainless steel case, so you can use it in rainy weather without fear of damaging the equipment. Made in China.

The power consumed during operation is 1700 W. Operates from a network of 220-240 V. Warming up takes about 3-5 minutes. The total weight of the product is 25.5 kg.

The equipment is capable of releasing fireworks for 15 minutes. The height can be adjusted from 1 to 10 meters, the maximum height of cold sparks is 10 meters. For one minute of work, the required amount of powder is 11 grams. Floor or hanging installation. Used for holding public events in the open air.

The cost of this special effects generator is 417,000 rubles.

DJ Power V-4

Advantages:

• Moisture protection;
• Fireworks height.

Flaws:

• Very high cost.

DJ Power V-3

Power consumption is 600 W. It takes 5 minutes to warm up the equipment. The maximum ejection height is 5 meters, which can be adjusted. The powder container has a volume of 200 grams, its consumption is 11 grams per minute of operation.

An electronic thermostat and a fan are installed, which can be adjusted as needed.

Remote and manual control using an LCD panel. The device has a wireless card reader that monitors the quality of the powder being poured. Recommended consumable is Spark Seed PRO-K. The noise level is 70 dB.

The weight of the product is 7.5 kg, dimensions 20.5x20x25.5 cm. Its cost is within 63,000 rubles.

DJ Power V-3

Advantages:

• Compact;
• Wireless card reader that determines the quality of the powder being poured.

Flaws:

• Not detected.

DJ Power V-1

Floor generator, power consumption - 700 W. The required heating time is just over 3 minutes. The height of the fireworks reaches 5 meters and can be adjusted in 10 positions.

The powder consumption is 14 grams per minute, the capacity of the entire tank is designed for 200 grams. Continuous operation time – 14 minutes. To prevent overheating, the device is equipped with a thermostat, an electric thermostat, and a fan with adjustable speed.

A special feature of the device is the presence of a wireless card reader. The powder must come with a plastic card that unlocks the device. If the consumables are of poor quality, the card reader will not start the generator. Therefore, manufacturers recommend using Spark Seed PRO-K powder to create special effects.

The weight of the device is 10 kg, dimensions 20.5x25x31.6 cm. The price of such a generator is within 76,000 rubles.

DJ Power V-1

Advantages:

• Relatively low cost;
• A card reader that determines the quality of the powder being poured.

Flaws:

• Not detected.

Our practice

Active promotion began at the end of 2011. Until this time, the whole topic of “dry fog” was in its infancy. At the level, someone somewhere uses it for themselves and their friends. Even car washes didn’t understand why they needed it.

The most important thing for the client is reliable information about the service and the quality of delivery .

Without this, unscrupulous entrepreneurs, under the guise of a dry fog, carried out conventional aromatization with a temporary effect. Or they reduced processing time to a minimum. Processing took 5-10 minutes.

The theory of the “dry fog” technology was obtained from the USA, and practice was carried out in car clubs in Moscow. Look at reviews from car enthusiasts about dry fog

Having received real practice and created a working methodology, we applied it to expand our project aromavto.rf

Now the Desfog project is the only team of specialists who have studied the “dry fog” technology to the smallest detail and have the most extensive experience in removing odors.

Support and training.

About our support.

Any of our clients receives any amount of advice before and after the purchase. We have nothing to hide, we answer as it really is. We will always ask why you need “dry fog” and clarify all your needs and desires. We will try to understand your problem taking into account our practice.

We do not impose “dry fog” - we are interested in loyal customers who are really going to remove odors using the “dry fog” technology, and not take it for a couple of months without figuring it out, and then write reviews that it doesn’t work.

Read reviews about the work of the Desfog project from our clients on the Review service. You can also find reviews about our activities on other sites.

And here are reviews in the Otzovik service about the practice of our clients, those who bought “dry fog” and actually tested it in operation. You can find other reviews on other sites on the Internet.

In our VK group you can request support on various topics. We provide support from 9 a.m. to 9 p.m. Moscow time on VK, by mail [email protected] . You can use this support by making a request from the pages of our website, using livesite services and instant messengers that are displayed there.

About our training system.

As a result of many years of practice, we settled on individual training . We trained car wash employees, conducted video seminars, and personally met with clients, where for 2-3 hours we talked about the technology and showed how to work. Each time this turned out to be not enough and more time was required to provide the necessary information.

It is not enough to simply watch the fog exit the fogger and fill the volume. Here are some campaigns that advertise that they will show how dry fog works. They simply fog into the volume (car interior or room), in the end you will only see clouds of fog, but will not understand the technology itself. And if the technology is fake (stage smoke for fog machines or hot fog generators that try to use fog), then there is no point in wasting time on it at all.

All you have to do is read these two instructions and then ask us questions. This is how your individual training begins. If you cannot cope with such a volume, then it will be difficult for you in the future. You will make mistakes and not understand what you are doing wrong.

About dry fog and calculations for it

Instructions for working with dry fog

Where can I buy

The widest range of these products can only be found in the online store. Not all cities have specialized stores that will sell such a narrow profile, and they will still have a more modest selection.

But sites can surprise the user with the variety of products offered among special effects generators. The new products section will introduce the buyer to new arrivals. Filters based on the necessary queries will allow you to choose the most optimal option based on price, manufacturer or specific type of generator.

Popular models usually appear at the very top of the list, so it may be worth paying special attention to them. It is also recommended to read reviews from other customers: they can provide information about the quality production of specific equipment.

On the website, each special effects generator has a detailed description with all the characteristics, as well as an image of the product itself. If necessary, you can consult with the manager or seller.

Upon final selection, a purchase order is submitted. After this, the user waits for the goods to be delivered within the agreed time frame.