How to make a pinwheel from a plastic bottle to repel moles

In order to get rid of a mole infestation in your dacha, it is not at all necessary to immediately take drastic measures by purchasing mole traps or ultrasonic repellers. Sometimes a device such as a windmill is enough. It’s easy to make even with your own hands.

Do you know that moles in the country are also beneficial? They eat some harmful insects (for example, mole crickets and click beetles) and their larvae, loosen the ground, thereby saturating it with oxygen. But the harm caused by these creatures in summer cottages is visible to the naked eye much more than the benefits of their actions. If this is a fundamental issue for you, it’s time to get down to business seriously and make a windmill from a plastic bottle to repel moles.

The effectiveness of homemade scarecrows

Outwardly, moles look like cute and harmless animals.
But at the same time, they can cause significant harm to the garden plot. Moles by nature are blind animals. Thanks to this, their hearing is highly sensitive. Accurate determination of the permanent habitat can be difficult because the family has several exits from the burrow. Therefore, determining its location is not easy. The task is further complicated by the fact that the depth of the hole can reach several meters. As a result, the right solution is to make homemade turntables from available or scrap materials.

Moles, in addition to causing harm, can also be beneficial. They constantly need food of animal origin. The animals eat beetles, caterpillars and worms in large numbers. Therefore, when deciding on the need to fight, you need to correlate these two facts. In addition, during the digging process, moles loosen and mix the soil.

In addition to the methods described above, you can use simple alarm clocks. You will need a few pieces in total. Clock mechanisms are placed in glass jars and placed in pits. In the process of fighting, you will need to set alarms several times a day for different times. As a result, moles will quickly leave the territory due to the regular and shrill ringing.

To increase efficiency, you can take a medium-diameter polymer pipe and drill many holes. When the clock mechanism is triggered, the hum will spread along its entire length and in all directions. Intense ringing will quickly force ferrets to change their habitat.

Repellers

Taking advantage of the fact that moles are very sensitive to various sounds. A number of manufacturers currently produce electroacoustic devices. First of all, ultrasonic devices. They do not cause any harm to humans, but for moles they become a problem for daily existence on the site.

Among the advantages is the penetration of sounds and other vibrations everywhere, despite obstacles. Typically, such devices operate from autonomous power sources, so they can be placed anywhere in the garden.

Mole traps

In cases where there are really a lot of moles, or for some unknown reason it is not possible to get rid of them using simple methods, mole traps will help. These devices will allow you to catch females ready to breed in early spring.

To determine the location for the trap, you need to press down the mole's passage.

Installation in such areas ensures quick capture of the animal. The main passages are often located in straight directions along fences, fences and foundations. The meandering lines are temporary, so setting traps there will not be effective.

Mole traps consist of several elements:

  • input ring;
  • pressure lever;
  • guard ledge;
  • alertness itself;
  • spring ring.

The frame is made of a piece of steel wire 3.5–4 mm thick. Between the support and pressure zones there is a spring in the form of a spiral of 2.5 turns. The spring should create a pressing action of 4–5 kg and reliably press the animal to the lower area of ​​the entrance ring with a weight of 2–2.5 kg.

Operating principle:

  • When preparing the device, the pressure clamp is raised in the upper direction;
  • the design provides for the penetration of the mole to a sufficient depth before the mechanism is triggered;
  • the animal touches the horn with its head and thereby releases the clamping device.

Over the course of one day, several animals move along the selected path. At the same time, other individuals bypass the captured animal, making a small undermining. Therefore, along the entire path, you can catch a large number of moles at one time.

The main reason for the invasion of animals into garden plots is the looseness and fertility of the soil. Due to this, the prevalence of pests is highest. Since they are a favorite food of moles, the latter's colonies can be quite impressive.

All of the above methods have been tested many times by experienced gardeners. The production of some of them does not require financial investment at all. But the result will exceed all expectations, and uninvited guests will quickly disappear from the occupied territory.

Gardens and vegetable gardens are a good help both in terms of food and in terms of relaxation for the soul. But everything that is grown on personal plots faces many dangers - beetles, larvae, birds, moles. And if chemicals help fight plant diseases or insect pests, then it is best to scare away birds and moles from the site, rather than destroy them. A primitive design will help with this - a windmill made from a plastic bottle, made with your own hands from scrap materials.

brief information

As a rule, people want to get rid of problems with moles once and for all, but not everyone understands what exactly needs to be done. Some people immediately go to the store in the hope of finding a unique and at the same time inexpensive remedy against these small pests, while others try to make a mole repeller with their own hands. Still others turn to the Internet for help in the hope of finding something new and never used before.

Simple design

Before you start fighting moles, you need to determine the reason for the spread of these animals and determine the factors that make it difficult to scare them away.

We must start with the fact that all moles live in very large families. And if you manage to destroy or scare away one animal, it is too early to rejoice, since his whole family may come after him. Typically, a mole family consists of several adults and growing individuals. In addition, different families may unite at certain times of the year. At the same time, the area of ​​their distribution increases accordingly.

Moles dig holes, the depth of which can sometimes exceed several meters. In addition, they have many outlets. This is why it is so difficult to determine the location of these animals. They can spread throughout the entire area and do not allow summer residents to live in peace.

These animals are quite strong and agile, they are almost impossible to catch. But even if you succeed, be careful - moles bite painfully and do it often.

Many years of searching for an effective remedy that could help combat these pests have borne fruit. And as a result, an ultrasonic repeller was designed.

Tools and materials

The device is made from simple and affordable materials. The design can have different sizes. A windmill for a vegetable garden is created using:

  • two 1.5 liter plastic bottles (use plastic of different colors or pre-paint it with acrylic paints from spray cans);
  • durable scissors;
  • sewed;
  • pliers;
  • stationery or construction knife;
  • strong but easily bendable metal wire;
  • four multi-colored plastic bottle caps;
  • large beads.

Decide in advance on the size of the mole repellent structure. Before making a large turntable, additionally acquire:

  • a high wooden pole;
  • round metal pin;
  • a small wooden block;
  • multi-colored or transparent plastic liter bottles - you will need 4 pieces;
  • two washers.

Moscow

By courier within the Moscow Ring Road

When ordering before 13:00 - delivery on the same day, after 13:00 - the next day.

The cost within the Moscow Ring Road is 350 rubles.

Pickup from the store - free

Moscow, Novopeschanaya str. 13 bldg. 3 (before visiting the store, check availability by phone)

Opening hours: Mon-Fri: from 10 to 20, Sat-Sun: from 11 to 18

Pickup points

Delivery time to the point of issue: 2-3 business days. day

Pickup cost: 200 rub.

Payment: cash or bank card

Delivery to the region

Delivery to the region -

350 rub + 30 rub. 1 km from the Moscow Ring Road

Basic manufacturing methods

Inventive summer residents have come up with a large number of ways to quickly build devices from improvised and even completely unnecessary things. Among them, there are several simple and quite effective options for combating moles.

Pinwheel made from a plastic bottle

The device looks like a kind of weather vane, which, when exposed to wind, produces a sound that is unpleasant for moles. It can work in any conditions.

To make a windmill, you will need a number of simple steps:

  • take a standard 1.5 liter plastic bottle;
  • Use sharp scissors to carefully cut off the bottom;
  • turn it upside down and draw lines for cuts with a marker.

There are five sections on the bottom. It is necessary to mark the areas from the edge of the circle to the middle parts of each ray. Cut out the selected areas. After this, making a do-it-yourself mole trap from plastic bottles will be almost complete.

In the center you need to punch a hole with smooth edges. Insert a self-tapping screw into the center of the lid and screw it in until it stops.

For a more rigid fixation, it is advisable to use a nut of suitable diameter.

On the neck of the bottle, along the middle line, make two holes for the nail opposite each other. After this, secure the windmill to a pole and stick it into the ground.

Tin repellers

These include simple devices such as a piece of reinforcement with a suspended beer can, for example. Surfaces hitting each other under the influence of gusts of wind will produce loud sounds that are unpleasant for moles. The result of the manufacturing scheme is presented below.

An additional advantage is that metal reinforcement will conduct sound into the ground to a greater depth. As a result, the moles will leave the developed territory.

In the form of an airplane

Instructions on how to make an airplane-shaped mole repeller from a plastic bottle step by step:

  • to make the hash brown, a metal pipe of medium diameter is dug into the ground;
  • a separate pin will need to be tightly attached to the top of the site;
  • make several cuts in the form of blades on the bottle;
  • make holes at the bottom of the container with a hot nail;
  • Place the bottle on the installed pin.

When exposed to wind, the blades will begin to rotate. The vibrations of the windmill will be directed towards the soil and scare away moles.

From several

To increase efficiency, it is recommended to install several turntables at once. The soil, especially dry soil, quickly muffles sounds. Installing individual elements will provide a much more active effect in repelling moles.

Method No. 5

To make another option, you will need a stick, garden shears and a plastic bottle. Further like this:

  • in the walls you need to make wide cuts along the walls;
  • they will require 2 additional cuts in a perpendicular direction at the top and bottom;
  • after bending individual sections, you will get unique blades;
  • the assembled mechanism must be put on the support, after which the device will become ready for action.

Under the influence of wind, parts of the system will begin to rotate. This will create an unpleasant sound that can rid the area of ​​mole settlements.

Method number 6

To make a mole repeller with your own hands from a plastic bottle, you will need an additional plate cut from another bottle. Make 15 cm long slits in a solid bottle. Blades for a propeller of approximately the same size are made from a separate part.

Then they are stuck into the prepared holes to form a fan. You will need to make an additional puncture in the lid for the metal rods. After this, attach the structure to the stick. When rotating, the homemade product will make a peculiar noise to scare off moles.

Design test

After the angler has successfully managed to make a spinner of the desired shape and size, it is worth starting to debug its performance by adjusting the parameters when fishing at different speeds, directly in the conditions of the reservoir. Initially, they check whether the size of the petal in relation to the rod of the product allows it to start working when the spinner is lifted from the bottom. To do this, the product is placed on the bottom and the bait is pulled in with a sharp tug using the tip of the rod. In this case, the petal should begin to rotate, becoming at an angle of no more than 45 degrees to the core. When reeling, the angler should feel a distinct and even vibration from the movement. In case of failures, the work is adjusted by changing the geometry of the petal, bending its edges, pressing or straightening the bulges until the optimal cocking rhythm is achieved.

Having adjusted the detonation, they begin to check the aerodynamics of the spinner, casting at a distance, if necessary, additionally immersing the core and petal with soldering or making it easier by filing and grinding. Test casts are accompanied by reeling at different reeling speeds, selecting speeds at which the vibrations are most distinct and there are few malfunctions in the operation of the product. After adjusting the performance characteristics, the final painting of the turntable begins, and then the first catch can be carried out.

Repellers that affect pests using vibration

Such devices are based on the principle of influencing animals using low-frequency vibrations, which are perfectly captured by the animals and cause them a feeling of discomfort. Its use in open areas is more effective than the use of ultrasonic devices, since the soil is a much better conductor of vibrations than ultrasonic waves.

The devices are equipped with an electronic timer that changes the vibration pattern, which prevents animals from becoming accustomed to a specific type of vibration effect. As a result, after 7–14 days the moles leave the inhospitable and uncomfortable area for their life.

Design features of rotating spinners

For a predator, this type of spinner is attractive not only for its visual characteristics, but also for the powerful flow of vibration waves created by the rotating working body of the accessory. The design features of rotating spinners are based on the circular rotational movements of a tin petal loosely strung on a metal rod through the pressure of the water column when guiding the product, carried out by winding the cord with a tackle reel. The resistance of the petal to the flow of water creates vibration waves that arouse the active interest of the predator, which, together with periodic glimpses of a moving spinner, provokes the fish to attack the object.

Eternal exile: blockade the moles

In addition to temporary methods of fighting moles, there are also more reliable ones, after which the animal will never be able to visit you at all. But this is not a one-day job. The main point of the fight is to place a blockade along the entire perimeter of the site, through which the mole will not penetrate. And since the animal rarely burrows more than a meter deep into the ground, it is precisely this depth that needs to be dug with a trench. It's a long time. But also effective! The finished trench is filled with slate sheets, metal mesh, stones and other hard material that the animal cannot break through. This layer should reach the very surface of the earth and be only slightly covered with soil. It is especially convenient to create such a barrier at the time of installing the fence. For example, for concrete fences the foundation is poured, although not to this depth. But you can dig even deeper and protect yourself from uninvited guests!

It should be remembered that not every mole in the garden will end in your victory. There are animals that are not afraid of either strong smells or noise. And then you will have to catch them with mole traps, and build an underground blockade for the “aliens.”

Advantages of using a turntable

During the hunt, the animal is capable of digging up an area even in a short period of time. A bottle spinner for repelling moles will scare them away and protect existing crops.

Interesting! From experience, some summer residents know that underground inhabitants cannot tolerate various noises.

For example, this could be the sounds of an alarm clock, knocking on metal, or plastic crackling. Since the goal is not to destroy the guests, the trap will solve the problem in a humane way.

Do-it-yourself antikrot No. 6

And the last miracle device, made with your own hands against moles, is a giant propeller, the design of which, again, did not do without tin cans.

As you can see, the basis of all the mole repellers that have been listed is the principle of creating as much noise as possible in the ground where the mole lives. And since moles do not like noise, they will leave your area.

The SMR-801 repeller is designed for areas up to 1000 square meters. m. Used against various rodents and moles. Powered by solar panels and built-in battery.

Tornado OZV.02 is designed to protect land from rodents and other pests (moles, shrews, gophers, rats, voles, mole crickets). For areas up to 2000 sq. m.

Electronic earth pest repeller antikrot Tornado OZV.01, designed to protect land from the habitat of rodents and pests (moles, shrews, gophers, rats, voles, mole crickets, etc.). Power: 6 V. Effective area: 1000 sq.m.

This repeller is for areas up to 650 sq. m. Designed to combat all common crop pests: moles, voles, shrews and others. The mole repeller SM-153 (MS-15) operates on a solar panel to which a battery is connected.

Mole 1 (WK-0675) emits ultrasonic and sound signals that affect the nervous system of moles and force them to leave the protected territory. Power supply: 4 class D alkaline batteries. Effective area: 100 sq. m.

The mole repeller is designed to protect land plots from the habitat of rodents and pests (moles, shrews, mole crickets, etc.). Power: Solar battery + battery. Effective area: 350 sq.m.

Everyone likes the singing of birds, it is interesting to watch the snake in the circus and it is interesting to look at the mole in the picture. It would seem, what do moles, birds and reptiles have in common? First the bad: we don't like them all as uninvited guests. Those who read this do not need to explain why. Now about the good stuff: all these living creatures are afraid of noise!

Here I am: you probably weren’t expecting me?

Let's assume that they won't be able to reach an agreement among themselves and won't all attack at once. However, there are folk remedies that help get rid of all the listed pests indiscriminately in the garden.

We use electronic devices

The use of industrially produced electronic mole repellers is a simpler and, in most cases, a more effective way to get rid of pests on the site than using homemade products. However, the use of such devices already requires certain financial costs (the cost of devices in stores, depending on the quality and principle of operation, ranges from 800-5000 rubles).

The greatest effectiveness in repelling moles is shown by devices that generate not only sound, but also vibration, and in a random mode - with varying frequency, duration and sound frequency (an example of such a device is, for example, the mole repeller Ecosniper LS-997MR; the letter M in the name indicates for the presence of a motor in the device that produces vibration, and R – operation in the “random” mode, that is, with randomly changing switching intervals and the duration of sound and vibration).

When purchasing this or that repeller, you should keep in mind that the price more or less reflects the quality of the device: for example, Chinese mole repellers for 600-800 rubles often cannot withstand even one rain, or the battery charge from a solar battery is only enough for a couple of hours of operation in Night time. It is clear that getting rid of moles in a summer cottage using such devices will be very problematic.

The photo below shows several examples of battery-powered sonic mole repellers (usually one set of batteries lasts for 3-6 months):

And these photographs show examples of repellers with solar panels that charge the built-in battery during the day:

And again, it is impossible to say in advance whether such a device will help in your case - testing is required. There are many positive reviews where even one post dug into a plot expelled moles from the garden literally within a day. But there are also cases when models of repellers considered to be quite effective did not allow getting rid of moles for the entire season.

If you decide to test a sonic mole repeller in practice on a large plot of land, then it is useful to limit yourself to purchasing 1-2 products to begin with. And only when it becomes clear that the device really gives the required result and the moles near it have significantly reduced their activity (usually within a radius of 15-20 meters), then it makes sense to use the selected model on a larger scale.

Mole trap made from a plastic bottle

So, the first type of trap is a kind of analogue of the commercially available pipe mole trap, but the “locking” element in it works on a slightly different principle.

The photo below shows a mole trap-pipe for comparison:

The mole easily climbs into such a trap, but cannot get out of it. It is implemented as follows:

Take a plastic bottle with a capacity of 1.5 liters - it will be the basis of the design

It is not worth taking smaller or larger bottles, because a liter bottle is too narrow, and it is difficult for the animal to climb into it, and a two-liter bottle, on the contrary, is too wide, and often does not fit into the animal’s path; Either the bottom or the neck of the bottle is cut off - it doesn’t matter. The main thing is to make a free entrance on one side, and on the other there should be a dead end; Then take a second bottle of the same size, which, in fact, will clog the mole. The dense part of the neck is cut off (on which the cap is screwed), but a “funnel” is left, and the bottom is also cut off (you can even cut off the bottom half of the bottle); In the second bottle, 10-12 longitudinal cuts are made on the tapering part until the transition to the flat part

The result is a kind of long “petals”; After this, the second plastic bottle is inserted with its narrowed part into the open passage of the first, and the junction of the two bottles is secured with tape.

The dense part of the neck is cut off (on which the cap is screwed), but a “funnel” is left, and the bottom is also cut off (you can even cut off the bottom half of the bottle); In the second bottle, 10-12 longitudinal cuts are made on the tapering part until it becomes a flat part. The result is a kind of long “petals”; After this, the second plastic bottle is inserted with its narrowed part into the open passage of the first, and the junction of the two bottles is secured with tape.

That's all, the mole trap is ready. If you place it in a mole passage, the animal will make its way into it along the second (entrance) bottle: under its pressure, the petals will easily bend and do not prevent it from crawling along the joint line, thereby ensuring unhindered access to the main bottle.

After the animal passes, the petals close again. Here he reaches a dead end, turns around, tries to move back, but runs into narrowed petals that he can no longer move apart. The mole is caught.

This mole trap made from plastic bottles is easy to make with your own hands in about 10-15 minutes.

Not everyone takes into account that this mole trap can be easily improved, increasing its efficiency by approximately 2 times, if both the bottom and the top of the main bottle are cut off, and then “valves” are installed on both sides, allowing the animal to only pass inside. In this case, you won’t have to guess from which side the mole will approach the mole trap in its underground passage. Moreover, as practice shows, if there are several animals on the site, a “double” trap can catch two moles at once.

The video at the end of the article shows the process of making a mole trap with your own hands.

However, it is important not only to make the mole trap correctly, but also to install it correctly on the site, since the final result of its work also largely depends on this

Tee additional bait

Rotating spinners are equipped with a tee corresponding in size to the dimensions of the spinner. There is a reason to add elements to the tee that will increase the attractiveness of the bait.

Important! The main thing in this improvement is not to overload the accessory, which can interfere with the quality of quick activation of the spinner petal.

The threesome can be equipped with small silicone molds in the form of a twister or a worm. A synthetic bright red thread, tied in a bunch that covers the point of the hooks, performs well. Some craftsmen knit the likeness of a fly or other insect with lush plumage onto the forend of a hook, including a natural feather and a thin metallic golden or silver thread.

Important! Hooks covered from the forearm to the sting with a panicle of thin wires can not only additionally attract the attention of a predator, but also make a spinner in the form of a non-snag, which is convenient for use in overgrown reservoirs.

Radical methods of struggle

If the methods listed above did not help, it’s time to radically change your actions. The moles must sense whose land it is. We must continue the fight with the help of:

  • ultrasonic device (bought at a garden center, runs on batteries within a radius of 15 meters);
  • mechanical mouse traps;
  • firecrackers (they are set on fire and thrown into passages);
  • rags soaked in gasoline (placed in the center of the hummock and covered with earth);
  • smoke screen (the newspaper is doused with machine oil, set on fire, and the mole is smoked out with smoke);
  • granular mineral fertilizers (filled inside the hole, buried with earth);
  • raw chicken egg (it will rot in the molehill and drive it out);
  • a zinc-based preparation;
  • chemical poisons from rodents;
  • exhaust gas from a running car engine.

Mechanical methods of mole control have proven their effectiveness in practice. Along the entire perimeter of the site, a mesh is buried to a meter depth, gravel is poured, boards and old linoleum are laid (whatever is found in the house). This will create a barrier. Will not allow the digger into the territory.

To protect the lawn from unwanted visitors, lay out a plastic mesh over the entire surface of the area allocated for it. The top is covered with drainage and soil. Even if a mole climbs into the area, it will not be able to lift a mountain of earth onto the grass - the net located below will interfere.

Mechanical methods will not drive away the underground guest, but they will not spoil the appearance of the landscape design.

Printed circuit board

Due to the impossibility of manufacturing a printed circuit board for a mole repeller using chemical technology, a mechanical method was used to remove sections of copper foil from foiled fiberglass laminate.

The location of radio components on the printed circuit board of the mole repeller is shown in the photo below.

The appearance of the printed circuit board for manufacturing by photochemical method and the location of radioelements is shown in the photograph below.

The board can be made from 1.5 mm thick fiberglass foil on one side.

A site visitor, who introduced himself as San Sanych, kindly provided his version of a rodent repellent printed circuit board, laid out in the graphic editor for PCB layout Sprint-Layout 3.0R, for which many thanks to him.

Options from plastic bottles

The simplest version of a homemade repeller is a bottle placed on a pin. Also suitable for empty beer cans. The pin must be stuck into the ground so that sound and vibration are transmitted to the wormholes.

The most difficult option is a windmill against moles. To make it you will need a one and a half liter beer bottle.

In addition to the bottle, you need good scissors, a marker, a self-tapping screw with threads that do not reach the head, a nail, an awl and a windmill stick. Given the maximum complexity of creating such a mole repeller from a plastic bottle, there are no visual diagrams or drawings. There is only an extremely clear video.

  1. The bottom of the bottle is cut off along the horizontal line that is found on all plastic bottles.
  2. The cut bottom is turned over with the bottom up. The bottom has the shape of a five-rayed star. Using a marker, mark the areas that need to be cut out: from the border of the central circle strictly in the middle of the “ray” and from the middle of the central circle along the hollow between the “rays”. This part needs to be cut off. It turns out that half of the “beam” is cut out.
  3. The operation is repeated on all “rays”. The propeller is ready. All that remains is to punch a hole strictly in the center of the circle. The hole should have perfectly smooth edges and a diameter larger than the provided screw.
  4. Insert a self-tapping screw with the head “inward” into the resulting propeller and screw it into the center of the bottle cap until the thread runs out. To make screwing easier, you first need to make a small hole in the cap. On the inside of the cover, the self-tapping screw can be secured with a nut for reliability.
  5. Make two holes for a nail at the bottom of the bottle neck, strictly along the center line. The holes must be strictly opposite each other.
  6. Take an almost finished windmill and secure it to a wooden pole. Stick the pole into the ground in the garden.

When there is wind, the propeller makes a rather nasty noise, which moles are afraid of. The advantage of a windmill is that it will work in any wind direction. In fact, this is an ordinary weather vane.

The ultrasonic model sends high-power ultrasound signals towards the dog. Ultrasound has a depressing effect on dogs, forcing them to turn around and even run away, while the device is completely safe for humans. As the dog approaches, the signal intensifies and the animal begins to feel discomfort. The device is compact and can be carried with you in a bag or pocket. As the animal approaches, it will react and the signal will increase. With a repeller, a whole pack of dogs is not scary, which is very convenient; you can do without blood and victims. There are a lot of electrical diagrams for this device on the Internet, so if necessary, you can assemble it yourself and buy the components at any radio store. The device is quite simple, and it will cost you much less.

An electric device or stun gun is no less popular. It’s also compact, and when you press the button it produces a characteristic crackling sound, which means that ozone is released, which is unpleasant to a dog’s sense of touch. The device is dangerous for an approaching dog; if the distance decreases, it can give an electric shock and temporarily paralyze

The device will also force the dog to open its jaws if the dog still grabs you.

Gas in the form of a gas canister with a chemical filler inside

When buying a spray can, pay attention to its technical characteristics, since not all products are effective; if a dog attacks, the product may simply fail. When sprayed, the dog should charge, run away and no longer show aggression.

In principle, you can build a gas pistol yourself by filling the cartridges with red hot pepper. You can leave the device idle. Sound is effective against dogs; the device can also be made with a light signal reflector.

Repeller - smell. Everyone knows that dogs have an excellent sense of smell and they do not at all like, for example, the smell of medical or isopropylene alcohol. All you have to do is wet the tampon. But this method has a big disadvantage - the alcohol evaporates quickly, which means you need to carry it with you at all times when going outside. Hot capsicums are irritating to the dog's nose, skin, and eyes, as is the smell of lemon, orange, and vinegar.

What is a weather vane for?

A weather vane is needed to determine the direction of the wind if it is really needed, for example at weather stations it is necessary. As it is, it is mainly used as decoration and some kind of toy - it’s always interesting to watch which way the wind blows. You can trace in the sky and the direction of the wind where the clouds are moving and whether they will bypass your house.

Nowadays, a weather vane is more of a home decoration; it is also given some “mystical” properties; it is believed that it protects the house. It is also a kind of symbol of the house.

A weather vane can also be used to scare away birds and rodents (from vibrations into the ground), if you make it so that it makes some sounds when rotating or transmits vibrations into the ground along a pole from a spinning propeller.

Making a simple mole repeller

A simple plastic bottle will help us here. The thing is also very multifunctional, from which craftsmen make everything very simply and no abstruse drawings or operations are required. We just take the bottle and cut it out, and then bend the blade pockets. Next, from below, in the bottom, we make the hole we need. And we put the bottle on a tube (diameter about 1 cm) or on a thick steel wire (or something similar).

At the slightest wind, such a bottle with blades spins very well on the tube, and this creates noise, which also resonates into the tube (therefore, the tube is preferable in this case). And this noise, through the tube, goes into the ground, that is, into mole tunnels. Such a tube with a bottle should be inserted into underground voids, next to a fresh molehill.

To further enhance the effectiveness of this technique, you can further improve the design of such a homemade pinwheel device made from a plastic bottle.

For this we will already need a water supply, metal pipe. The diameter of this pipe can be 1/2 mm or 3/4 mm, there is not much difference. We hammer this tube deeper, that is, so that the lower part (that is, the end of this tube) is slightly deeper than the level of the mole’s underground passages. Next, we insert a suitable metal pin into this tube (the part at the top). And so that this pin does not dangle in the tube, it will need to be strengthened in the center with a wooden stopper. Then we also put it on the pin, having previously made a hole in its bottom, using a hot awl or a nail. The diameter of such a hole should be slightly larger than the diameter of the pin itself. We also make blade pockets on the bottle, which we bend outward. That's it, the repeller is ready. When the wind blows, the bottle will rotate, and the hollow pipe will again resonate this unpleasant sound. This creates noise, which moles are very afraid of; they simply cannot stand this constant and very unpleasant noise for them and will leave your area.

You can create the same effect if you stretch your used tape from a video or tape cassette onto small pegs made of any material (25-30 centimeters). When it vibrates, it also creates an unpleasant, slightly whistling sound. Such a sound is also good at scaring away these mole rats. In addition to moles, birds, such as sparrows, for example, are also afraid of such a device.

In conclusion, there is also a video where they will show you the manufacturing technology of this device. Let's see.

The appearance of moles on a lawn or garden plot does not bode well, even if the animal accidentally damages the roots of plants and does not feed on crops from the garden bed. Trees, shrubs, and vegetable plants that find themselves in the hunting field of the common mole die. Within a few days, nothing remains of the ideal lawns. In addition, they destroy beneficial earthworms and throw layers of infertile soil to the surface.

A good owner cannot stand this, and begins to look for an effective and quick way to get rid of the uninvited guest and his family once and for all.

Read - and what do they bring more - benefit or harm?

But before organizing the expulsion of a low-blind pest, it is necessary, at least in general terms, to become familiar with its biology. For some, their knowledge of moles ends with the cartoon about Thumbelina. But in real life, moles do not count money themselves, but force the owner of a lawn or garden plot to count losses.

Advice from gardeners

There is a lot of advice on the Internet, but not all of them are effective, and some are even dangerous:

  • Flooding passages with water from a garden hose. With an extensive network of tunnels, flooding will turn the area into a swamp.
  • Start the exhaust from the car into the passages. The method is dangerous for the entire microfauna of the site - microorganisms necessary for cultivated plants. May be hazardous to pets and small children.
  • Poison from boiled wheat and poison. Moles are not interested in plant foods, so the method is ineffective.
  • Domestic cats are excellent mole hunters. Perhaps such a home hunter will not be able to remove the entire colony of moles, but it will help significantly.
  • Perhaps the best advice is to think things through in advance. Set up a fence and set traps. Determine the place where to take the caught moles to increase their chances of survival.

As you can see, there are various folk methods that allow you to remove moles from the site: you can plant plants that are unpleasant for the pest, install mechanical repellers and traps. In special cases, poisonous substances are used, but you need to be careful and weigh everything carefully. A reliable way to prevent intrusion is a mesh barrier.

It is not necessary to destroy moles. This animal is a necessary part of the natural balance. It eats insect pests in large quantities and repels rodents. But, if the gardener does not intend to put up with this, then the folk methods of how to remove moles from the site once and for all, described above, will come in handy for him.

In the second year, several moles appeared. They moved to my well-kept beds from the neighbors and actively began to destroy the roots of beets, cabbage and other vegetables. They do not feed on plants, but destroy beds and lawns in the process of preying on mice, worms and insects in the soil. I’ll tell you how to drive moles away from your site and what means other summer residents use.

Step-by-step instructions for creating a mole repeller

Step-by-step instructions depend on the type of windmill, its size, shape, so each “propeller” will be slightly different both externally and during its manufacture.

So, when you have everything you need, you can start

The bottle can be of any color, shape, volume... This is not so important. Provide yourself with a comfortable place to work

It is better to do everything at a table on a flat surface. Then no problems will arise. The instructions are as follows:

  1. Take a plastic bottle and a knife (scissors).
    From it you need to make a pinwheel, which, thanks to the blades, rotates in the wind. There are many options here. You can create one row of blades, but long ones, or you can cut two rows, but smaller ones in a checkerboard pattern. There can be 2, 3 or 4 blades in a row. It all depends on you. You just need to make a vertical cut, from which two additional horizontal ones extend from above and below. This is necessary in order to bend the blades. Advice! Bend the blades to one side, otherwise the repeller spinner will not spin.
  2. Next you need to make a hole in the bottom to insert the rod into it. The hole should not be end-to-end; the stick or rod should move freely through it. A rod is inserted into this hole and the structure is almost ready.
  3. There is another variation where you don't need a drill. It is enough to unscrew the cap from the bottle and place it on the glue on the bottom from the inside. The lid is fixed with the sides up. Since you already have the blades ready, nothing will stop you from doing this. Now the bottle can be put on a rod or stick through the neck. And thanks to the lid, the structure will not wobble much while in one place.
  4. Sometimes the sound of simple rotation is not enough. Moles are blind, so their hearing is very acute. But a frequently rotating bottle will not make sounds. In this case, you need to make a ratchet. There are plenty of options. You can attach a bell to the blades, which will significantly enhance the sound and vibration.

That's all, the device is ready. Now you just need to find the mole's tunnel in order to insert the rod into it. Due to the vibration and sound transmitted from the bottle along the rod into the ground, moles will not approach this place. They are afraid of such aggressive noises. If you have a large garden, then make several structures to prevent moles from appearing in another part of the garden.

What you need for work

The advantage of a plastic bottle repeller is that you will need a minimum set of tools and materials. Anyone can work with them, and purchasing them is not a problem at all. You can see this for yourself. Here's a list of everything you'll need:

  • plastic bottle;
  • steel rod or wooden stick;
  • stationery knife or scissors;
  • drill with a drill (in some cases this is not required).

That's the whole set. Are you surprised? It’s not worth it, because for all its simplicity, the mechanism works flawlessly. You just need to connect it all into one device.

Note! The device is automatic, but only works from the wind. In calm, windless weather it will simply be useless.

Less humane means:

  • chemicals (chemicals) - sold in gardening stores;
  • special mechanical wing traps. They operate similarly to mousetraps. Bait is placed inside. The mole enters the trap and remains there. Usually such devices are stuck into a mink:

calling a team of specialists who pump a certain chemical composition into the mink. It causes moles to lose their sense of smell and soon die.

We would recommend using products that literally kill rather than repel moles in extreme cases, when the damage from moles is widespread and nothing else helps. Remember that moles in the country also have benefits: they eat the larvae of insect pests (chafer bug, mole cricket, click beetle, moth pupae, as well as the seeds of some weeds).

The mole looks like a cute, harmless animal, but it can cause destructive damage to a planted plot of land. The mole lives underground and, breaking through tunnels, harms the root system of plants.

Ways to combat moles are as follows:

  1. Ultrasonic repellers;
  2. Poisoned with food;
  3. The holes where the mole comes out are filled in.

Some gardeners use homemade traps. How to make a mole repeller

yourself and which of them are more effective is described in this article.

What danger do underground inhabitants pose when they find themselves on the territory of a garden plot?

However, no matter what the defenders of underground inhabitants say, their presence on the site causes enormous harm:

  • the animal actually feeds on insects, but their diet also includes earthworms, which, in turn, have a tremendous impact on soil fertility;
  • daily blasting destroys the root system of plants that act as an obstacle to the path;
  • distorts the external state of the site beyond recognition;
  • leaves behind passages that are subsequently used by mice, causing considerable damage to the crop;
  • mixes the lower heavy layers of soil with the most fertile ones, which promises a decrease in its quality characteristics;
  • a lawn spoiled by pits is very difficult to mow with a lawn mower;
  • digs up water runoff with piles of soil, which retains excess moisture;
  • acts as a carrier of diseases that can cause irreparable damage to human health.

    Moles are not difficult to deal with

Paying attention to the fact that moles are family animals, you can be one hundred percent sure that after a while they will begin to multiply, and the damage caused will grow exponentially.

Living underground, animals do not limit themselves in any way to underground paths; they create countless tunnels, one after another. Like people, they expand their home: they provide it with a corridor, storage rooms, and emergency exits. Corridors.

Moles are extremely voracious, they destroy everything that appears on their way: larvae, earthworms, butterflies, frogs, small shrews. All that they were not able to swallow right away, they leave for the future, digging out new loopholes for the bins.

Alarm clock repeller

To be effective, you need to have several alarm clocks that have different alarm times. Alarm clocks are placed in jars, which are closed with lids and installed in different places on the site. The best option is to bury containers with alarm clocks in the ground. As a result, after a certain time, all alarm clocks underground will start to go off stably. Sounds regularly made in the area will force moles to look for more comfortable places.

The second option consists of a pipe buried in the ground into which an alarm clock is placed on a string. Thanks to the rope, such an alarm clock can always be taken out of the pipe.

Details

Instead of a BA1 telephone capsule of the TK-67-NT type, you can use similar capsules of the TA-56M, TA-56, TON-2 or TG-7 type with a winding resistance of about 60 Ohms. Diodes, capacitors and resistors are suitable for any type.

Diodes, capacitors and resistors are suitable for any type. Any npn transistor is suitable, but it is better with a minimum voltage drop between the collector and emitter. In this case, the emitted power of the sound signal will be greater without increasing the current consumption of the mole repeller.

The D1 chip of type K561LE5 can be replaced with a foreign analogue CD4001A, and type K561IE16 with a CD4020B chip.

How to scare away birds

A windmill made from a plastic bottle must be movable to scare away birds. The simplest and most budget option is a turntable. It does not require additional costly motors and batteries, because it runs on air movement. But it needs blades to catch the wind. You can make several options for such garden helpers. For example, like this.

Cut an ordinary plastic bottle in the center into four sections that can be bent without separating the parts from the whole.

Then, bending the blades so that they catch the wind, pieces of foil are glued onto them. You can use self-adhesive mirror film. It is also necessary to cut a hole in the bottom that is suitable in diameter. The finished windmill bottle is placed on the remainder of the plastic pipe or the handle of a mop. The bottle should rotate freely when the wind blows, but not dangle too much, otherwise rotation will not work. The remainder of the pipe should be long enough for the birds to see the pinwheel.

You can make a windmill from a plastic bottle with your own hands in this version - cut long blades from the base of the bottle, bend them at an angle of 45 0. The turntable diagram is shown below.

Such a windmill is mounted on a rigid base at right angles to the ground. You can secure it in any way - using a nut, if the base is threaded, using a large smooth bead, making a loop on the wire with pliers. There are many options; the master decides which one is more convenient to use. The most important thing is that the turntable rotates freely. Some craftsmen attach several of these devices to one base, decorating them with colored film or painting them with acrylic paints. The result is not only functionally useful, but also a beautiful thing for a personal plot.

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]