The danger of tick bites is quite high. These arthropods are carriers of serious diseases, including Lyme disease, tick-borne encephalitis, and ehrlichiosis. The first action that needs to be taken when you discover an attached creature is to pull it out. To do this quickly and without undesirable consequences for humans, you need to use a device for removing ticks.
Unclean Tick Twister
This device is a hook; it helps to remove ticks, both small and large. The set includes 2 plastic twisters; they are made in France and look like a miniature nail puller. This shape is very convenient for removing the insect without damaging the abdomen. The design allows you to grab the parasite directly under the proboscis. Then you just need to make a few rotational movements, and the entire insect will be outside without tears. Tik Twister has the following advantages:
- different sizes of the tool, you can choose the one that suits the size of the parasite;
- if the necessary actions are performed correctly, the insect is removed intact, which protects against the negative effects of the insect’s saliva;
- convenient shape for performing rotational movements;
- acceptable cost - 200-250 rubles;
- small dimensions of the device (fits easily in a pocket or purse).
- Gooseberry wine - step-by-step recipes for making it at home
- Gazpacho soup
- How to avoid getting infected by people who work with clients and money
A special device - “twister”
Today it is possible to purchase a special device - a twister. The device does not allow squeezing the tick, which distinguishes it from tweezers and minimizes the risk of infection. Externally, the twister is similar to a small nail puller, but its dimensions can be different, taking into account the size of the plier. Using a twister, the tick is grabbed from the side and pulled up with a little effort.
pliers twister
Tick Key
The tick extractor helps you get the parasite out in seconds. The tool is made in the form of an anodized aluminum plate with a slot. Outwardly, it looks a bit like a tin can key, but has 2 holes. One is necessary for convenient attachment to a key ring, and the second (drop-shaped) for securely capturing the parasite. The price of the tool is 350-480 rubles. The procedure is performed as follows:
- Take the Tick Key securely.
- Place the cut so that the parasite's proboscis is at its narrowest point.
- Perform a pulling motion with the tool upward. If everything is done correctly, the parasite will be removed along with the head.
A few more flat options for ticks
Flat tick pliers work on the same principle as “keys” and “spoons”.
Here are some examples of such flat tools:
- Pro-Tick (USA) - a device that looks like a simple elongated metal plate with a tapering part on one side. Costs about 300 rubles. Can be worn as a keychain;
- Tickminator (Tick Remover Card) is a plastic tick remover, both in size and shape similar to a regular plastic bank card, in which the gripping part for large ticks is cut out, the same for small ones, and a small magnifying glass is installed, which allows you to check whether whether the head of the tick came off. Its cost is approximately 1000 rubles; .
The disadvantages of these tools are that they are not always convenient to rotate due to their somewhat bulky design. This device in the form of a flat metal plate with a slightly curved narrow part is partially devoid of this drawback:
Tick Nipper
The device strongly resembles miniature pliers. The Tick Nipper is safe and easy to use. The small cupped tips are a fascinating element. The shape of the tool is ideal for capturing an insect without damaging or crushing its body. The cost of the forceps is 240-480 rubles, the kit includes a magnifying glass with 20x magnification. To remove a tick you need:
- Place the tool under the parasite's proboscis.
- Squeeze the forceps carefully so as not to accidentally crush the arthropod.
- Unscrew the insect using smooth rotational movements.
- 6 Common Myths About Chronic Pain
- 8 ways to keep yourself from falling asleep at work
- New types of inheritance
What to do if the head remains in the body
If, when removing a tick with tweezers, thread or a syringe, you tore the body of the parasite and left its head with a proboscis under the skin, it must be removed. If this is not done, suppuration will begin, and it will also be a source of pathogenic microorganisms that cause dangerous diseases. Before removing, treat the bite site with a disinfectant; Medilis-asept is suitable for this purpose. The skin antiseptic "Medilis-ASEPT" is officially registered as a means of medical disinfection by Rospotrebnadzor and is a professional product, not a cosmetic product. Certificate of registration RU.77.99.88.002.E.008854.09.15 dated 09/07/2015. Also wipe the needle with this product, or even better, ignite it over a fire. You need to carefully pick up the head with a needle and pull it out like a splinter.
If, after removing the tick, the bite site remains red, inflamed and bothersome, consult a doctor.
Trix
Swedish tool for removing blood-sucking insects. Outwardly it is very similar to a simple ballpoint pen. A special loop (lasso) appears from the tip instead of a rod when you press the button. It is used to capture the tick's body. It is important that the loop is right at the base of the proboscis, and not on the body. The compact device fits easily into your pocket. The cost of the device is 300-400 rubles. Instructions for use:
- Click on the tip of the pen to make the lasso appear.
- Throw it over the tick so that the loop is on the proboscis.
- Release the button smoothly and the lasso will gradually tighten itself.
- Twist the handle until the entire parasite is removed.
Removing ticks using improvised means
For the most part, people try not to think about the fact that they might be bitten by a tick. Therefore, it is not always possible to be prepared to remove the parasite and have a special device with you. Then improvised means come to the rescue.
The most common method is to remove the parasite manually. But we must not forget that the tick can burst when squeezed with your fingers, and the infected discharge gets onto the skin. Therefore, it is recommended to use a piece of cloth or a regular handkerchief. We wrap it around the tick's body and gently pull it upward with twisting movements.
Removing ticks using traditional methods
Another well-known accessible way to pull out a bloodsucker is to wrap it around it using a loop of thread. It is better to use a cotton thread, because a thin silk thread can strongly press the tick’s neck and tear it. A loop of thread is placed over the parasite and smoothly pulled from side to side and up until it is completely removed.
On a note!
The safest method of pulling out a tick is to use a regular medical syringe. You need to carefully cut off the end so that the edges are even. The resulting hole should be able to wrap around the skin around the wound with the tick. Pressing the cut end of the device tightly against the skin, you need to pull the piston towards you. The vacuum created inside the container pulls the parasite out of the wound. This mite extractor allows you to quickly and safely cope with an unpleasant task.
Ticked-off
Externally, the tool for pulling out parasites resembles a spoon with a slot. The device is made of plastic and has a compact size, so you can carry it with you. You can buy it in several colors: orange, pink, white. At the tip of the handle there is a special hole for attaching to a bunch of keys. Price – 250-550 rubles. Instructions for use:
- Place the slit under the tick's proboscis.
- Make sure it is caught by the narrowest part of the pullout tool.
- Unscrew the parasite.
Actions after tick removal
After a successful procedure, you need to carefully examine the bloodsucker to see if all body parts are in place and if they are in the wound under the skin. If there is, then use a needle treated with alcohol to pull out the remaining parts. Treat the skin around the bite with lotion, iodine or brilliant green. Then the representative of the arthropod must be taken to the nearest laboratory for testing. If this is not possible, then it is necessary to destroy it with fire.
Trixie
This is another retrieval device with a lasso loop at the tip like a handle. Made from plastic in several colors. The cost of the tool is 100-250 rubles. Instructions for use:
- Press the button on the end of the handle to release the loop.
- Throw a lasso over the tick's head in the area of the proboscis.
- Release the button to tighten the loop.
- Use a rotating motion to remove the parasite.
Industrial extractors
Specialized stores and pharmacies offer a fairly large selection of tools for removing ticks. They differ in shape, principle of operation, material of manufacture, and price. Absolutely every user can choose an option that suits him in all respects.
Unclean tick twister
This French-made tick remover is designed taking into account all the characteristics of blood-sucking parasites and allows you to get rid of them with ease. The device looks like a small fork with two prongs, between which there is a tapering gap. The tool catches the tick. After it is fixed between the teeth, the device is carefully rotated around its axis several times. The tick is not damaged and can be removed easily and quickly.
Tick twister
The simplest device with which you can remove a tick from the body of a person or pet. The plastic tool looks like a nail puller scaled down many times. The device is placed in such a way that the tick is in the crack, then it is turned several times, slightly (with virtually no effort, so as not to tear it off) pulling it up.
Trix tick lasso
A unique lasso handle made in Sweden. The technology of its use is simple, effective and allows you to quickly remove an attached parasite from the skin. There is a button on one side of the device that, when pressed, produces a loop made of durable material on the other side. The loop is thrown over the arthropod, brought as close to the skin as possible, then the button is released and the loop is tightened. All that remains is to turn the handle several times to pull out the bloodsucker.
Pro-tick
The pulling device is presented in the form of a steel plate with a slot at the end. Provides a comfortable grip on the tick. It only takes a few twisting movements to remove the insect. You can buy the device for 250-300 rubles. Pros of the Pro Tik device:
- durability (due to steel manufacturing);
- there is a hole for attaching it to a wallet or keychain;
- Sold together with a magnifying glass to make it easier to see the tick and pick it up correctly.
How to treat a wound
After removing the insect, it is necessary to thoroughly disinfect the wound. This can be done using medical alcohol, hydrogen peroxide, tincture of iodine, cologne or any antiseptic (for example, Chlorhexidine). After treatment, the skin should be left without a bandage (you can seal it with an adhesive plaster). It is necessary to avoid rubbing the wound on clothing for 1-2 days.
Semi-automatic tools
If it is necessary to carry out large volumes of work, automatic devices for removing the insulating coating are used. The semi-automatic wire stripper does not require rotation around each element. The built-in mechanism removes the braid from several wires at once. You need to select a hole of the desired diameter, place the conductor and press the handle.
Stripping pliers
They are a clamp with a built-in blade. They separate it and place the cable in the grooves, close it, press the button, the insulation is removed. Wire strippers carefully remove the outer covering and pre-treat coaxial cables for installation into the F-connector. The mechanism removes the sheath in a random area, cleans single-core, stranded, and flat elements.
Automatic wire stripping pliers
An automatic pliers or stripper simplifies the work of stripping the wire. The stripper is equipped with one socket; its size is adjusted to the diameter of the laid cable automatically. The range of used diameters is from 0.2 to 6 mm. This is a multifunctional tool; its use allows you to remove insulation, crimp lugs, cut wires, and twist individual wires into one bundle.
Wire strippers
Semi-automatic wire strippers, unlike manual models, are equipped with a mechanism that operates by pressing a button. There is a type of pliers that removes the braid from a twisted pair cable.
